All Issue

2020 Vol.30, Issue 11 Preview Page
Plasma Resistance of YAS (Y2O3-Al2O3-SiO2) Coating Layer with YAG Phase Contents

YAG 상함량에 따른 YAS (Y2O3-Al2O3-SiO2)계 코팅층의 내플라즈마 특성

Eui Keun Park
,
Hyun-Kwuon Lee†
박 의근
,
이 현권†
Department of Advanced Materials Science and Engineering, Kumoh National Institute of Technology, 61 Daehak-ro, Gumi-si, Gyeongsangbuk-do, 39177, Republic of Korea
금오공과대학교 신소재공학과
†Corresponding author E-Mail : hklee@kumoh.ac.kr (H.-K. Lee, Kumoh Nat’l Inst. Tech.)
October 2020. pp. 621-626
PDF XML Citation
Abstract

This study is aimed at preparing and evaluating the plasma resistance of YAS (Y2O3-Al2O3-SiO2) coating layer with crystalline YAG phase contents. For this purpose, YAS frits with controlled phase contents are prepared and melt-coated on sintered Al2O3 ceramics. Then, the results of phase analysis of crystalline YAS coating layer are compared to that of YAS frits, and discussed with regard to the plasma resistance of the YAS coating layer. The phase contents of the YAS frit change in a manner different from that of the prepared YAS coating layer, presumably owing to the composition change of YAS frit during the melt-coating process. The plasma resistance of the YAS coating layer is shown to increase with the YAG phase contents in the coating layer. Comparing the weight loss of YAS coating layer with those of commercial Y2O3, Al2O3, and quartz ceramics, the plasma resistance of the prepared YAS coating layer is 8 times higher than that of quartz and 3 times higher than that of Al2O3; this layer shows 70 % of the resistance of Y2O3.

Keywords
plasma resistance
coating
YAS (Y2O3-Al2O3-SiO2)
YAG
References
1.
G. S. May and C. J. Spanos, Fundamentals of Semiconductor Manufacturing and Process Control, p. 98, John Wiley & Sons, Inc., New Jersey (2006).
2.
C. D. W. Wilkinson, L. Deng and M. Rahman, Jpn. J. Appl. Phys., 41, 4261 (2002). 10.1143/JJAP.41.4261
3.
D.-M. Kim, S.-Y. Yoon, K.-B. Kim, H.-S. Kim, Y.-S. Oh and S.-M. Lee, J. Korean Ceram. Soc., (in Korean), 45, 707 (2008). 10.4191/KCERS.2008.45.1.707
4.
D.-M. Kim, Y.-S. Oh, S. Kim, H.-T. Kim, D.-S. Lim and S.-M. Lee, Thin Solid Films, 519, 6698 (2011). 10.1016/j.tsf.2011.04.049
5.
J.-K. Lee, S.-J. Park, Y.-S. Oh, S. Kim, H. Kim and S.- M. Lee, Surf. Coat. Technol., 309, 456 (2017). 10.1016/j.surfcoat.2016.11.021
6.
K.-B. Kim, D. Kim, J. Lee, Y.-S. Oh, H.-T. Kim, H. Kim and S.-M. Lee, J. Korean Ceram. Soc., (in Korean), 46, 456 (2009). 10.4191/KCERS.2009.46.5.456
7.
X. Qin, G. Zhou, H. Yang, J. I. Wong, J. Zhang, D. Luo, S. Wang, J. Ma and D. Tang, Ceram. Int., 38, 2529 (2012). 10.1016/j.ceramint.2011.11.023
8.
S.-J. Park, H. Kim and S.-M. Lee, Korean J. Mater. Res., 27, 710 (2017). 10.3740/MRSK.2017.27.12.710
9.
E. K. Park and H.-K. Lee, Korean J. Mater. Res., 30, 359 (2020). 10.3740/MRSK.2020.30.7.359
10.
B. Shah, V. K. Kakumanu and A. K. Bansal, J. Pharmaceut. Sci., 95, 1641 (2006). 10.1002/jps.2064416802362
11.
S. B. Anantharaman, V. B. Rajkumar, S. Raghunandan, K.C. H. Kumar, R. S. Kumar and A. S. Gandhi, J. Eur. Ceram. Soc., 37, 5001 (2017). 10.1016/j.jeurceramsoc.2017.06.040
12.
J. E. Shelby, Introduction to Glass Science and Technology, 2nd ed., p. 11, RSC, UK (2005).
13.
G.-Y. Yeom, Plasma Etching Technology (in Korean), p. 249, YOUNG, Korea (2006).
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 30
  • No :11
  • Pages :621-626
  • Received Date : 2020-09-24
  • Revised Date : 2020-10-14
  • Accepted Date : 2020-10-14
  • DOI :https://doi.org/10.3740/MRSK.2020.30.11.621
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close