Additive Manufacturing of Various Ceramic Composition Using Inkjet Printing Process

Jae-Hyeon Park; Jung-Hoon Choi; Kwang-Taek Hwang; Jin-Ho Kim

doi:10.3740/MRSK.2020.30.11.627

All Issue

2020 Vol.30, Issue 11 Preview Page Next Page

Additive Manufacturing of Various Ceramic Composition Using Inkjet Printing Process 잉크젯 프린팅을 이용한 연속 조성 세라믹 화합물 구조체 형성

October 2020. pp. 627-635

PDF XML

Abstract

3D printing technology is a processing technology in which 3D structures are formed by fabricating multiple 2D layers of materials based on 3D designed digital data and stacking them layer by layer. Although layers are stacked using inkjet printing to release various materials, it is still rare for research to successfully form a product as an additive manufacture of multi-materials. In this study, dispersion conditions are optimized by adding a dispersant to an acrylic monomer suitable for inkjet printing using Co₃O₄ and Al₂O₃. 3D structures having continuous composition composed of a different ceramic material are manufactured by printing using two UV curable ceramic inks whose optimization is advanced. After the heat treatment, the produced structure is checked for the formation and color of the desired crystals by comparing the crystalline analysis according to the characteristics of each part of the structure with ceramic pigments made by solid phase synthesis method.

Keywords

ink-jet printing

3D printing

photopolymerization

gradient ceramic 3D object

cobalt aluminate

References

S. Bose, D. Ke and H. Sahasrabudhe, Prog. Mater. Sci., 93, 45 (2018). 10.1016/j.pmatsci.2017.08.00331406390PMC6690629

C. J, Bae, A. Ramachandran, K.W. Chung and S. J. Park, J. Korean Ceram. Soc., 54, 470 (2017). 10.4191/kcers.2017.54.6.12

K. Cicha, Z. Li, K. Stadlamnn, A. Ovsianikov, R. Markut-Kohl, R. Liska and J. Stampfl, J. Appl. Phys., 110, 064911 (2011). 10.1063/1.3639304

C. R. Myers, S. R. Arwade, E. Iesulauro, P. A. Wawrzynek, M. Grigoriu, A. R. Ingraffea, P. R. Dawson, M. P. Miller and J. P. Sethna, Mater. Res. Soc. Symp. Proc., 538, 509 (1998). 10.1557/PROC-538-509

D. Kokkinis, M. Schaffner and A. R. Studart, Nat. Commun., 6, 1 (2015). 10.1038/ncomms964326494528PMC4639895

A. Paolini, S. Kollmannsberger and E. Rank, Addit. Manuf., 30, 100894 (2019). 10.1016/j.addma.2019.100894

J. W. Choi and H. C. Kim, J. Korean Soc. Manuf. Process. Eng., 14, 1 (2015).

R. Singh, R. Kumar, I. Farina, F. Colangelo, L. Feo and F. Fraternali, Polymers, 11, 62 (2019). 10.3390/polym1101006230960046PMC6401995

L. R. Lopes, A. F. Silva and O. S. Carneiro, Addit. Manuf., 23, 45 (2018). 10.1016/j.addma.2018.06.027

10.

K. M. Jeong, J. M. Won, Y. K. Lee and K. Koseki, J. Korea TAPPI, 46, 46 (2014). 10.7584/ktappi.2014.46.2.046

11.

J. D. Cho, S. H. Kim, I. C. Chang, K. S. Kim and J.W. Hong, Macromol. Res., 15, 560 (2007). 10.1007/BF03218831

12.

M. C. Rusu, C. Block, G. Van Assche and B. Van Mele, J. Therm. Anal. Calorim., 110, 287 (2012). 10.1007/s10973-012-2465-5

13.

K. C. Lee, J. W. Yoon, J. H. Kim, K. T. Hwang and K. S. Han, J. Korean Ceram. Soc., 23, 255 (2013). 10.6111/JKCGCT.2013.23.5.255

Information

Publisher :Materials Research Society of Korea
Publisher(Ko) :한국재료학회
Journal Title :Korean Journal of Materials Research
Journal Title(Ko) :한국재료학회지
Volume : 30
No :11
Pages :627-635
Received Date : 2020-09-11
Revised Date : 2020-10-14
Accepted Date : 2020-10-14
DOI :https://doi.org/10.3740/MRSK.2020.30.11.627

Korean Journal of Materials Research ISSN:1225-0562(Print) 2287-7258(Online) 한국재료학회지

All Issue