All Issue

2020 Vol.30, Issue 7 Preview Page
Fabrication of Plasma Resistant Y2O3-Al2O3-SiO2 Coating Ceramics by Melt-Coating Method

용융코팅법에 의한 내플라즈마성 Y2O3-Al2O3-SiO2계 코팅 세라믹스 제조

Eui Keun Park
,
Hyun-Kwuon Lee†
박 의근
,
이 현권†
Department of Advanced Materials Science and Engineering, Kumoh National Institute of Technology, 61 Daehak-ro, Gumi-si, Gyeongsangbuk-do 39177, Republic of Korea
금오공과대학교 신소재공학과
†Corresponding author E-Mail : hklee@kumoh.ac.kr
July 2020. pp. 359-368
PDF XML Citation
Abstract

This study is aimed at improving the plasma resistance of Al2O3 ceramics on which plasma resistant YAS(Y2O3- Al2O3-SiO2) frit is melt-coated using a simple heat-treatment process. For this purpose, the results of phase analysis and microstructural observations of the prepared YAS frits and the coating layers on the Al2O3 ceramics according to the batch compositions are compared and discussed with regard to the results of plasma resistance test. The prepared YAS frits consist of crystalline or amorphous or co-existing crystalline and amorphous phases according to the batch compositions, depending on the role and content of each raw material. The prepared YAS frit is melt-coated on the densely sintered Al2O3 ceramics, resulting in a dense coating layer with a thickness of at least ~ 80 mm. The YAS coating layer consists of crystalline YAG(Y3Al5O12), Y2Si2O7, and Al2O3 phases, and YAS glass phase. Plasma resistance of YAS coated Al2O3 ceramics is strongly dependent on the content of the YAG(Y3Al5O12) and Y2Si2O7 crystalline phases in the coating layer, especially on the content of the YAG phase. Comparing the weight loss of YAS coating ceramics with values obtained for commercial Y2O3, Al2O3, and quartz ceramics, the plasma resistance of the YAS coating ceramics is 6 times higher than that of quartz, 2 times higher than that of Al2O3, and 50 % of the resistance of Y2O3.

Keywords
plasma resistance
coating
YAS (Y2O3-Al2O3-SiO2)
References
1.
G. S. May and C. J. Spanos, Fundamentals of Semiconductor Manufacturing and Process Control, p. 98-102, John Wiley & Sons, Inc., New Jersey (2006).
2.
S.-M. Lee, Y.-S. O and D.-M. Kim, Ceramist (in Korean), 15, 47 (2012).
3.
S. Jiansirisomboon, K. J. D. MacKenzie, S. G. Roberts and P. S. Grant, J. Eur. Ceram. Soc., 23, 961 (2003). 10.1016/S0955-2219(02)00207-8
4.
G. S. Selwyn, J. E. Heidenreich and K. L. Haller, Appl. Phys. Lett., 57, 1876 (1990). 10.1063/1.104021
5.
I. H. Arita, D. S. Wilkinson and G. R. Purdy, J. Am. Ceram. Soc., 75, 3315 (1992). 10.1111/j.1151-2916.1992.tb04427.x
6.
L. Wu, G. Liu, J. Li, B. He, Z. Yang and Y. Chen, Ceram.-Silik., 55, 228 (2011).
7.
A. K. Varshneya, Fundamentals of Inorganic Glasses, 2nd ed., p. 35-43, 113-117, Society of Glass Technology, Sheffield (2012).
8.
J. E. Shelby, Introduction to Glass Science and Technology, 2nd ed., p. 72-80, 124-135, RSC, UK (2005).
9.
K.-H. Sun, J. Am. Ceram. Soc., 30, 277 (1947). 10.1111/j.1151-2916.1947.tb19654.x
10.
P. L. Flaitz and J. A. Pask, J. Am. Ceram. Soc., 70, 449 (1987). 10.1111/j.1151-2916.1987.tb05674.x
11.
G.-Y. Yeom, Plasma Etching Technology (in Korean), p. 249-257, YOUNG, Korea (2006).
12.
K.-B. Kim, D. Kim, J. Lee, Y.-S. Oh, H.-T. Kim, H. Kim and S.-M. Lee, J. Korean Ceram. Soc., 46, 456 (2009). 10.4191/KCERS.2009.46.5.456
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 30
  • No :7
  • Pages :359-368
  • Received Date : 2020-05-25
  • Revised Date : 2020-07-03
  • Accepted Date : 2020-07-03
  • DOI :https://doi.org/10.3740/MRSK.2020.30.7.359
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close