All Issue

2018 Vol.28, Issue 7 Preview Page
Review of Types, Properties, and Importance of Ferrous Based Shape Memory Alloys
Rana Atta Ur Rahman12†
,
Daniel Juhre1
,
Thorsten Halle1
1Department of Mechanical Engineering, OvGU, Magdeburg, Germany
2Department of Mechanical Engineering, UET, Taxila, Pakistan
†Corresponding author E-Mail : rana.rahman@ovgu.de (R. A. Rahman, OvGU)
July 2018. pp. 381-390
PDF XML Citation
Abstract

Shape memory alloys(SMAs) have revolutionized the material engineering sciences as they exhibit exclusive features i.e. shape memory effect(SME) and super-elasticity. SMAs are those alloys that when deform return to their predeformed shape upon heating, they also restore their original shape by removing the load. Research on properties of newly advent of several types of ferrous based shape memory alloys(Fe-SMAs), shows that they have immense potential to be the counterpart of Nitinol(NiTi-SMA). These Fe-SMAs have been used and found to be effective because of their low cost, high cold workability, good weldability & excellent characteristics comparing with Nitinol(high processing cost and low cold workability) SMAs. Some of the Fe-SMAs show super-elasticity. Fe-SMAs, especially Fe-Mn-Si alloys have an immense potential for civil engineering structures because of its unique properties e.g. two-way shape memory effect, super elasticity and shape memory effect as well as due to its low cost, high elastic stiffness and wide transformation hysteresis comparative to Nitinol. Further research is being conducted on SMAs to improve and impinge better attributes by improving the material compositions, quantifying the SMA phase transition temperature etc. In this research pre-existing Fe-SMAs are categorised and collected in a tabulated form. An analysis is performed that which category is mostly available. Last 50 years data of Fe-SMA publications and US Patents is collected to show its importance in terms of increasing research on such type of alloys to invent different compositions and applications. This data is analysed as per different year groups during last 50 years and it was analysed as per whether the keywords exist in title of an article or anywhere in the article. It was found that different keywords related to Fe-SMAs/categories of Fe-SMAs, almost don’t exist in the title of articles. However, these keywords related to Fe- SMAs/categories of Fe-SMAs, exist inside the article but still there are not too many publications related to Fe-SMAs/categories of Fe-SMAs.

Keywords
ferrous
sma(SMA)
fe-based sma(SMA)
importance
References
1
W-S. Chang and Y. Araki, Proc.- Inst. Civ. Eng., 169; 87 (2016)
2
M. Mishra and A. Anish Ravindra, Int. J. Struct. Civ. Engg. Res., 3; 96 (2014)
3
I. Nikulin, T. Sawaguchi, K. Ogawa and K. Tsuzaki, Acta Mater., 105; 207 (2016)
10.1016/j.actamat.2015.12.002
4
O. Grässel, L. Krüger, G. Frommeyer and L. Meyer, Int. J. Plast., 16; 1391 (2000)
10.1016/S0749-6419(00)00015-2
5
A. Sato, E. Chishima, K. Soma and T. Mori, Acta Metall., 30; 1177 (1982)
10.1016/0001-6160(82)90011-6
6
A. Sato, Y. Yamaji and T. Mori, Acta Metall., 34; 287 (1986)
10.1016/0001-6160(86)90199-9
7
A. Cladera, B. Weber, C. Leinenbach, C. Czaderski, M. Shahverdi and M. Motavalli, Constr. Build. Mater., 63; 281 (2014)
10.1016/j.conbuildmat.2014.04.032
8
P. Huang, H. Peng, S. Wang, T. Zhou and Y. Wen, Mater. Charact., 118; 22 (2016)
10.1016/j.matchar.2016.05.012
9
J. Wan and S. Chen, Curr. Opin. Solid State Mater. Sci., 9; 303 (2005)
10.1016/j.cossms.2006.07.005
10
H. Li, D. Dunne and N. Kennon, Mater. Sci. Eng. A, 273-275; 517 (1999)
10.1016/S0921-5093(99)00391-3
11
Y.H. Wen, W. Zhang, N. Li, H.B. Peng and L.R. Xiong, Acta Mater., 55; 6526 (2007)
10.1016/j.actamat.2007.08.005
12
W.J. Lee, B. Weber, G. Feltrin, C. Czaderski, M. Motavalli and C. Leinenbach, Mater. Sci. Eng. A, 581; 1 (2013)
10.1016/j.msea.2013.06.002
13
H. Otsuka, H. Yamada, T. Maruyama, H. Tanahashi, S. Matsuda and M. Murakami, ISIJ Int., 30; 674 (1990)
10.2355/isijinternational.30.674
14
A. Druker, A. Baruj and J. Malarría, Mater. Charact., 61; 603 (2010)
10.1016/j.matchar.2010.03.005
15
B. Jiang, X. Qi, W. Zhou, Z.L. Xi and T.Y. Hsu, Scr. Mater., 34; 1437 (1996)
10.1016/1359-6462(95)00673-7
16
H. Kubo, K. Nakamura, S. Farjami and T. Maruyama, Mater. Sci. Eng. A, 378; 343 (2004)
10.1016/j.msea.2003.10.359
17
A.V. Druker, A. Perotti, I. Esquivel and J. Malarría, Mater. Des., 56; 878 (2014)
10.1016/j.matdes.2013.11.032
18
W.J. Lee, B. Weber and C. Leinenbach, Constr. Build. Mater., 95; 600 (2015)
10.1016/j.conbuildmat.2015.07.098
19
N. Bergeon, S. Kajiwara and T. Kikuchi, Acta Mater., 48; 4053 (2000)
10.1016/S1359-6454(00)00187-7
20
A. Baruj, T. Kikuchi and S. Kajiwara, Mater. Sci. Eng. A, 378; 337 (2004)
10.1016/j.msea.2003.10.358
21
D. Wang, D. Liu, Z. Dong, W. Liu and J. Chen, Mater. Sci. Eng. A, 315; 174 (2001)
10.1016/S0921-5093(01)00959-5
22
O. Matsumura, T. Sumi, N. Tamura, K. Sakao, T. Furukawa and H. Otsuka, Mater. Sci. Eng. A, 279; 201 (2000)
10.1016/S0921-5093(99)00644-9
23
A. Druker, P. La Roca, P. Vermaut, P. Ochin and J. Malarría, Mater. Sci. Eng. A, 556; 936 (2012)
10.1016/j.msea.2012.07.097
24
T. Sawaguchi, T. Kikuchi, F. Yin and S. Kajiwara, Mater. Sci. Eng. A, 438-440; 796 (2006)
10.1016/j.msea.2006.01.119
25
M. Koster, W.J. Lee, M. Schwarzenberger and C. Leinenbach, Mater. Sci. Eng. A, 637; 29 (2015)
10.1016/j.msea.2015.04.028
26
V. Fuster, a.V. Druker, a. Baruj, J. Malarría and R. Bolmaro, Mater. Charact., 109; 128 (2015)
10.1016/j.matchar.2015.09.026
27
L. Kang, D. Zhizhong, L. Yongchang and Z. Lin, Smart Mater. Struct., 22; 1 (2013)
28
L. Kang, D. Zhizhong, L. Yongchang and Z. Lin, Smart Mater. Struct., 22; 45002 (2013)
10.1088/0964-1726/22/4/045002
29
W.J. Lee, B. Weber, G. Feltrin, C. Czaderski, M. Motavalli and C. Leinenbach, Smart Mater. Struct., 22; 125037 (2013)
10.1088/0964-1726/22/12/125037
30
A. Baruj, T. Kikuchi, S. Kajiwara and N. Shinya, Mater. Sci. Eng. A, 378; 333 (2004)
10.1016/j.msea.2003.10.357
31
T. Sawaguchi, Mater. Trans., 47; 580 (2006)
10.2320/matertrans.47.580
32
H. Li, F. Yin, T. Sawaguchi, K. Ogawa, X. Zhao and K. Tsuzaki, Mater. Sci. Eng. A, 494; 217 (2008)
10.1016/j.msea.2008.05.013
33
T. Sawaguchi, Scr. Mater., 54; 1885 (2006)
10.1016/j.scriptamat.2006.02.013
34
Y.H. Wen, L.R. Xiong, N. Li and W. Zhang, Mater. Sci. Eng. A, 474; 60 (2008)
10.1016/j.msea.2007.05.043
35
W.J. Lee, B. Weber, G. Feltrin, C. Czaderski, M. Motavalli and C. Leinenbach, Mater. Sci. Eng. A, 581; 1 (2013)
10.1016/j.msea.2013.06.002
36
H.C. Lin, K.M. Lin, Y.C. Chuang and T.S. Chou, J. Alloys Compd., 306; 186 (2000)
10.1016/S0925-8388(00)00762-3
37
A. Sato, K. Soma and T. Mori, Acta Metall., 30; 1901 (1982)
10.1016/0001-6160(82)90030-X
38
L. Huijun, The development of new iron based shape memory alloys (1996)
39
H.C. Lin, K.M. Lin, C.S. Lin and T.M. Ouyang, Corros. Sci., 44; 2013 (2002)
10.1016/S0010-938X(02)00027-6
40
T. Bouraoui, F. Jemal and T. Ben Zineb, Strength Mater., 40; 203 (2008)
10.1007/s11223-008-9012-4
41
A. Sato, H. Kubo and T. Maruyama, Mater. Trans., 47; 571 (2006)
10.2320/matertrans.47.571
42
C. Czaderski, B. Weber, M. Shahverdi, M. Motavalli, C. Leinenbach and W. Lee, Smar 2015, no. September, (2015)
43
K. Ogawa and S. Kajiwara, Mater. Trans., 34; 1169 (1993)
10.2320/matertrans1989.34.1169
44
T. Sawaguchi, Scr. Mater., 99; 49 (2015)
10.1016/j.scriptamat.2014.11.024
45
K. Tsuzaki, K. Fukuda, M. Koyama and H. Matsunaga, Scr. Mater., 113; 6 (2016)
10.1016/j.scriptamat.2015.10.016
46
T. Sawaguchi, T. Maruyama, H. Otsuka, A. Kushibe, Y. Inoue and K. Tsuzaki, Mater. Trans., 57; 283 (2016)
10.2320/matertrans.MB201510
47
M. Koyama, T. Sawaguchi, K. Ogawa, T. Kikuchi and M. Murakami, Mater. Sci. Eng. A, 497; 353 (2008)
10.1016/j.msea.2008.07.026
48
X. Zhang, T. Sawaguchi, K. Ogawa, F. Yin and X. Zhao, J. Alloys Compd., 577; S533 (2013)
10.1016/j.jallcom.2011.12.109
49
R.O. Ritchie and J. Lankford, Mater. Sci. Eng., 84; 11 (1986)
10.1016/0025-5416(86)90217-X
50
U. Sari, E. Güler, T. Kirindi and M. Dikici, J. Phys. Chem. Solids, 70; 1226 (2009)
10.1016/j.jpcs.2009.06.013
51
H. Fu, W. Li, S. Song, Y. Jiang and J. Xie, J. Alloys Compd., 684; 556 (2016)
10.1016/j.jallcom.2016.05.209
52
D. Lee, T. Omori and R. Kainuma, J. Alloys Compd., 617; 120 (2014)
10.1016/j.jallcom.2014.07.136
53
Y. Geng, J. Alloys Compd., 628; 287 (2015)
10.1016/j.jallcom.2014.12.172
54
H. Fu, H. Zhao, S. Song, Z. Zhang and J. Xie, J. Alloys Compd., 686; 1008 (2016)
10.1016/j.jallcom.2016.06.273
55
V. Torra, a. Isalgue, F. C. Lovey and M. Sade, J. Therm. Anal. Calorim., 119; 1475 (2015)
10.1007/s10973-015-4405-7
56
H. Fu, H. Zhao, S. Song, Z. Zhang and J. Xie, J. Alloys Compd., 686; 1008 (2016)
10.1016/j.jallcom.2016.06.273
57
A. Evirgen, J. Ma, I. Karaman, Z.P. Luo and Y.I. Chumlyakov, Scr. Mater., 67; 475 (2012)
10.1016/j.scriptamat.2012.06.006
58
L.W. Tseng, Acta Mater., 97; 234 (2015)
10.1016/j.actamat.2015.06.061
59
J. Ma, B. Kockar, A. Evirgen, I. Karaman, Z.P. Luo and Y.I. Chumlyakov, Acta Mater., 60; 2186 (2012)
10.1016/j.actamat.2011.12.047
60
P. Krooß, Acta Mater., 79; 126 (2014)
10.1016/j.actamat.2014.06.019
61
Y.I. Chumlyakov, I.V. Kireeva, O.A. Kutz, A.S. Turabi, H.E. Karaca and I. Karaman, Scr. Mater., 119; 43 (2016)
10.1016/j.scriptamat.2016.03.027
62
D. Lee, T. Omori and R. Kainuma, J. Alloys Compd., 617; 120 (2014)
10.1016/j.jallcom.2014.07.136
63
L.W. Tseng, J. Ma, I. Karaman, S.J. Wang and Y.I. Chumlyakov, Scr. Mater., 101; 1 (2015)
10.1016/j.scriptamat.2014.12.021
64
J. Mino, V. Komanicky, M. Durisin, K. Saksl, J. Kovac and R. Varga, , 51; 2014 (20152015)
65
T. Niendorf, Metall. Mater. Trans., A Phys. Metall. Mater. Sci., 46; 2829 (2015)
10.1007/s11661-015-2932-2
66
A. Ojha and H. Sehitoglu, Int. J. Plast., 86; 93 (2016)
10.1016/j.ijplas.2016.08.003
67
Z. Lodin, J. Blumajer and V. Mareš, Acta Histochem., 63; 74 (1978)
10.1016/S0065-1281(78)80009-9
68
S. Kajiwara and T. Kikuchi, Acta Metall. Mater., 38; 847 (1990)
10.1016/0956-7151(90)90038-I
69
H.E. Karaca, I. Karaman, Y.I. Chumlyakov, D.C. Lagoudas and X. Zhang, Scr. Mater., 51; 261 (2004)
10.1016/j.scriptamat.2004.04.002
70
C. Craciunescu, Y. Kishi, T. Lograsso and M. Wuttig, Scr. Mater., 47; 285 (2002)
10.1016/S1359-6462(02)00148-3
71
H.E. Karaca, I. Karaman, B. Basaran, Y.I. Chumlyakov and H.J. Maier, Acta Mater., 54; 233 (2006)
10.1016/j.actamat.2005.09.004
72
H.E. Karaca, I. Karaman, B. Basaran, D.C. Lagoudas, Y.I. Chumlyakov and H.J. Maier, Acta Mater., 55; 4253 (2007)
10.1016/j.actamat.2007.03.025
73
M. Wuttig, J. Li and C. Craciunescu, Scr. Mater., 44; 2393 (2001)
10.1016/S1359-6462(01)00939-3
74
A.A. Likhachev and K. Ullakko, Phys. Lett. A, 275; 142 (2000)
10.1016/S0375-9601(00)00561-2
75
O. Söderberg, X.W. Liu, P.G. Yakovenko, K. Ullakko and V.K. Lindroos, Mater. Sci. Eng. A, 273-275; 543 (1999)
10.1016/S0921-5093(99)00396-2
76
X. Huang, S. Chen, T.Y. Hsu and X.U. Zuyao, J. Mater. Sci., 39; 6857 (2004)
10.1023/B:JMSC.0000045620.49206.6a
77
B.C. Maji, C.M. Das, M. Krishnan and R.K. Ray, Corros. Sci., 48; 937 (2006)
10.1016/j.corsci.2005.02.024
78
B.Q. Hu, P.K. Bai, Z.Z. Dong and J. Cheng, Nonferrous Met. Soc. China English Ed., 19; 149 (2009)
79
C.A. Della Rovere, J.H. Alano, J. Otubo and S.E. Kuri, J. Alloys Compd., 509; 5376 (2011)
10.1016/j.jallcom.2011.02.051
80
A. Charfi, F. Gamaoun, T. Bouraoui, C. Bradai and B. Normand, 3rd Int. Conf. Manuf. Sci. Eng. ICMSE 2012; 476-478 (2012)
81
C.A. Della Rovere, J.H. Alano, R. Silva, P.A.P. Nascente, J. Otubo and S.E. Kuri, Corros. Sci., 57; 154 (2012)
10.1016/j.corsci.2011.12.022
82
C.A. Della Rovere, J.H. Alano, R. Silva, P.A.P. Nascente, J. Otubo and S.E. Kuri, Mater. Chem. Phys., 133; 668 (2012)
10.1016/j.matchemphys.2012.01.049
83
Z.Z. Dong, T. Sawaguchi, S. Kajiwara, T. Kikuchi, S.H. Kim and G.C. Lee, Mater. Sci. Eng. A, 438-440; 800 (2006)
10.1016/j.msea.2005.12.054
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 28
  • No :7
  • Pages :381-390
  • Received Date : 2018-03-26
  • Revised Date : 2018-07-02
  • Accepted Date : 2018-07-04
  • DOI :https://doi.org/10.3740/MRSK.2018.28.7.381
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close