All Issue

2025 Vol.35, Issue 12

Research Paper

Rheological Behavior of Shear Thickening Fluids with Carbon Nanotube Incorporation
Young Sil Lee1
,
Hyo-bin Nam2
,
Kwan Han Yoon2†
1Industry-Academic Cooperation Foundation, Kumoh National Institute of Technology, Gumi 39177, Republic of Korea
2Department of Chemical Engineering, Kumoh National Institute of Technology, Gumi 39177, Republic of Korea
†Corresponding author E-Mail : khyoon@kumoh.ac.kr (K. H. Yoon, KIT)
27 December 2025. pp. 567-573
PDF XML Citation
Abstract

This study investigates the rheological properties of shear thickening fluids (STFs) formulated by dispersing silica particles in polyethylene glycol (PEG), with the incorporation of multi-walled carbon nanotubes (MWNTs). The influences of silica particle content, carbon nanotube (CNT) loading, and surface functionalization were systematically examined. Rotational rheometry demonstrated that CNT addition significantly reduced the critical shear rate while enhancing the maximum viscosity of the STF. Systematic analysis demonstrated that MWNT incorporation significantly reduces the critical shear rate and enhances the maximum viscosity of the STF by forming bridging networks that reinforce shear-induced hydro-clusters. Crucially, acid-functionalization was established as a viable technique to improve CNT dispersion and stability, allowing for higher loadings and stronger shear thickening responses necessary for designing lightweight, high-performance protective materials. Field emission scanning electron microscopy analysis provided microstructural evidence, confirming that the enhanced performance arises from the high-aspect-ratio CNTs forming a physical bridging network between the silica particles, which effectively stabilizes and reinforces the shear-induced hydro-clusters. These findings offer crucial design guidelines by defining the optimal concentration window and necessity of surface functionalization to maximize the high-performance potential of lightweight CNT-modified shear thickening fluids. Excessive CNT loading, however, induced agglomeration, leading to a deterioration of shear thickening.

Keywords
shear thickening fluid
polyethylene glycol
silica
carbon nanotube
viscosity
References
1

J. F. Brady and G. Bossis, J. Fluid Mech., 155, 105 (1985).

10.1017/S0022112085001732
2

R. J. Butera, M. S. Wolfe, J. Bender and N. J. Wagner, Phys. Rev. Lett., 77, 2117 (1996).

10.1103/PhysRevLett.77.2117
3

R. G. Egres, F. Nettesheim and N. J. Wagner, J. Rheol., 50, 685 (2006).

10.1122/1.2213245
4

R. L. Hoffman, J. Rheol., 42, 111 (1998).

5

B. J. Maranzano and N. J. Wagner, J. Rheol., 45, 1205 (2001).

10.1122/1.1392295
6

H. A. Barnes, J. Rheol., 33, 329 (1989).

7

W. Jiang, F. Ye, Q. He, X. Gong, J. Feng, L. Lu and S. Xuan, J. Colloid Interface Sci., 413, 8 (2014).

10.1016/j.jcis.2013.09.020
8

P. Wang, X. Zhang, G. Lim, H. Neo, A. A. Malcolm, Y. Xiang, G. Lu and J. Yang, J. Mater. Sci., 50, 5978 (2015).

10.1007/s10853-015-9145-3
9

M. Wei, G. Hu, L. Li and H. Liu, Meccanica, 53, 841 (2018).

10.1007/s11012-017-0785-z
10

H. S. Son, K. H. Kim, J. H. Kim, K. H. Yoon, Y. S. Lee and H.-J. Paik, Colloid Polym. Sci., 296, 1591 (2018).

10.1007/s00396-018-4381-0
11

M. Wei, L. Sun, C. Zhang, P. Qi and J. Zhu, J. Mater. Sci., 54, 346 (2019).

10.1007/s10853-018-2873-4
12

S. R. Waitukaitis and H. M. Jaeger, Nature, 487, 205 (2012).

10.1038/nature11187
13

H. S. Son, K. H. Kim, E. H. Lee, J. H. Song, W. Lee, B. Seo, J. H. Kim, K. H. Yoon, Y. S. Lee and H.-j. Paik, Macromol. Res., 28, 523 (2020).

10.1007/s13233-020-8069-1
14

L. Sun, T. Liang, C. Zhang and J. Chen, Phys. Fluids, 35, 032002 (2023).

10.1063/5.0138294
15

Y. S. Lee, E. D. Wetzel and N. J. Wagner, J. Mater. Sci., 38, 2825 (2003).

10.1023/A:1024424200221
16

T. Tian and M. Nakano, Smart Mater. Struct., 26, 035038 (2017).

10.1088/1361-665X/aa5a2c
17

S. Li, Y. Wang, J. Ding, H. Wu and Y. Fu, Text. Res. J., 84, 897 (2014).

10.1177/0040517513512395
18

M. Wei, G. Hu, L. Jin, K. Lin and D. Zou, Smart Mater. Struct., 25, 055041 (2016).

10.1088/0964-1726/25/5/055041
19

D. Zielinska, B. Delczyk-Olejniczak, L. Wierzbicki, B. Wilbik-Hałgas, M. H. Struszczyk and M. Leonowicz, Text. Res. J., 84, 1569 (2014).

10.1177/0040517514525881
20

A. Majumdar and A. Laha, Text. Res. J., 86, 2056 (2016).

10.1177/0040517515619357
21

C. Lu, S. Li, X. Lu, J. Ma, W. Ma, X. Wang and S. Ba, Polym. Compos., 45, 3146 (2024).

10.1002/pc.27978
22

H. Liu, K. Fu, X. Cui, H. Zhu and B. Yang, Polymers, 15, 2238 (2023).

10.3390/polym15102238
23

R. G. Egres and N. J. Wagner, J. Rheol., 49, 719 (2005).

10.1122/1.1895800
24

T. Tian, G. Peng, W. Li, J. Ding and M. Nakano, Korea-Australia Rheol. J., 27, 17 (2015).

10.1007/s13367-015-0003-2
25

X.-Q. Liu, R.-Y. Bao, X.-J. Wu, W. Yang, B.-H. Xie and M.-B. Yang, RSC Adv., 5, 18367 (2015).

10.1039/C4RA16261G
26

Q. Chen, W. Zhu, F. Ye, X. Gong, W. Jiang and S. Xuan, Mater. Res. Express, 1, 015303 (2014).

10.1088/2053-1591/1/1/015303
27

W. C. Huang, Y. Z. Wu, L. Qiu, C. K. Dong, J. Ding and D. Li, Adv. Condens. Matter Phys., 2015, 734250 (2015).

10.1155/2015/734250
28

A. Laha and A. Majumdar, Appl. Clay Sci., 132, 468 (2016).

10.1016/j.clay.2016.07.017
29

A. Ghosh, I. Chauhan, A. Majumdar and B. S. Butola, Cellulose, 24, 4163 (2017).

10.1007/s10570-017-1440-5
30

L. Sun, G. Wang, C. Zhang, Q. Jin and Y. Song, Nanotechnol. Rev., 10, 1339 (2021).

31

P. Nakonieczna, L. Wierzbicki, R. Wrόblewski, T. Plocinski and M. Leonowicz, Bull. Mater. Sci., 42, 162 (2019).

10.1007/s12034-019-1860-y
32

P. Nakonieczna-Dabrowska, R. Wrόblewski, M. Plocinsha and M. Leonowicz, Materials, 13, 3870 (2020).

10.3390/ma13173870
33

M. Wei, Y. Lv, L. Sun and H. Sun, Colloid Polym. Sci., 298, 243 (2020).

10.1007/s00396-020-04599-3
34

R. Wang, Y. Zhou, Q. Wang, R. Sun, X. Jia and M. Tian, Therm. Sci., 27, 1787 (2023).

10.2298/TSCI2303787W
35

M. Hasanzadeh and V. Mottaghitalab, Rheol. Acta, 55, 759 (2016).

10.1007/s00397-016-0950-7
36

S. H. Jin, K. H. Yoon, Y. B. Park and S. S. Bang, J. Appl. Polym. Sci., 107, 1163 (2008).

10.1002/app.27153
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 35
  • No :12
  • Pages :567-573
  • Received Date : 2025-10-29
  • Revised Date : 2025-11-26
  • Accepted Date : 2025-11-26
  • DOI :https://doi.org/10.3740/MRSK.2025.35.12.567
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close