All Issue

2018 Vol.28, Issue 6 Preview Page
Effect of Needle-Like NiO Protecting Layer on NiCrAl Alloy Foam by Controlled Oxygen Concentration

산소 농도 제어를 통한 NiCrAl 합금 폼 표면의 침상 NiO 보호층 효과

Young-Geun Lee1
,
Dong-Yo Shin2
,
Hyo-Jin Ahn12†
이 영근1
,
신 동요2
,
안 효진12†
1Department of Materials Science and Engineering, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea
2Program of Materials Science & Engineering, Convergence Institute of Biomedical Engineering and Biomaterials, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea
1서울과학기술대학교 신소재공학과
2서울과학기술대학교 의공학-바이오소재 융합 협동과정 신소재공학프로그램
†Corresponding author : hjahn@seoultech.ac.kr (H.-J. Ahn, Seoul Nat’l Univ. Sci. Tech.)
June 2018. pp. 324-329
PDF XML Citation
Abstract

Needle-like NiO protecting layers on NiCrAl alloy foam, used as support for hydrogen production, are introduced through electroplated Ni and subsequent microwave annealing. To improve the stability of the NiCrAl alloy foam, oxygen concentration of microwave annealing to form a needle-like NiO layer with good chemical stability and corrosion resistance is controlled in a range of 20 and 50 %. As the oxygen concentration increases to 50 %, needle-like NiO forms a dense coating layer on the NiCrAl alloy foam; this layer formation can be attributed to accelerated growth of the (200) plane. In addition, the increased oxygen concentration causes increased NiO/Ni ratio of the resultant coating layer on NiCrAl alloy foam due to improved rate of the oxidation reaction. As a result, the introduction of dense needle-like NiO layers formed at 50 % oxygen concentration improves the chemical stability of the NiCrAl alloy foam by protecting the direct electrochemical reaction between the electrolyte and the foam. Thus, needle-like NiO can be proposed as a superb protecting layer to improve the chemical stability of NiCrAl alloy form.

Keywords
NiO protecting layer
NiCrAl alloy foam
oxygen concentration
electroplating
microwave annealing
References
1
R. Manabe, S. Okada, R. Inagaki and K. Oshima, Sci. Rep., 6; 38007 (2016)
10.1038/srep3800727905505PMC5131306
2
K.S. Go, S.R. Son, S.D. Kim, K.S. Kang and C.S. Park, Int. J. Hydrogen Energy, 34; 1301 (2009)
10.1016/j.ijhydene.2008.11.062
3
Y.G. Lee, G.H. An and H.J. Ahn, Korean. J. Mater. Res., 28; 182 (2018)
4
L. Barelli, G. Bidini, F. Gallorini and S. Servili, Energy, 33; 554 (2018)
10.1016/j.energy.2007.10.018
5
Y.J. Lee, B.R. Koo, S.H. Baek, M.H. Park and H.J. Ahn, Korean. J. Mater. Res., 25; 391 (2015)
6
D.Y. Shin, J.W. Be, B.R. Koo and H.J. Ahn, Korean. J. Mater. Res., 27; 390 (2017)
7
D.Y. Sin, E.H. Lee, M.H. Park and H.J. Ahn, Korean. J. Mater. Res., 26; 393 (2016)
8
Y. Ding and E. Alpay, Chem. Eng. Sci., 55; 3929 (2000)
10.1016/S0009-2509(99)00597-7
9
H.M. Fjeld, D. Clark, I.Y. Tirados, R. Zanon, D.C. Martinez, D. Beeaff, S.H. Morejudo, P.K. Vestre, T. Norby, R. Haugsrud, J.M. Serra and C. Kjolseth, Nat. Energy, 2; 923 (2017)
10.1038/s41560-017-0029-4
10
A.M. Adris, C.J. Lim and J.R. Grace, Chem. Eng. Sci., 52; 1609 (1997)
10.1016/S0009-2509(96)00511-8
11
A.P. Simpon and A.E. Lutz, Int. J. Hydrogen Energy, 32; 4811 (2007)
10.1016/j.ijhydene.2007.08.025
12
H. Choe and D.C. Dunand, Acta Mater., 52; 1283 (2004)
10.1016/j.actamat.2003.11.012
13
Q. Pang, Z.Y. Xiu, G.H. Wu, L.T. Jiang, D.L. Sun and Z.L. Hu, J. Mater. Process. Technol., 212; 2219 (2012)
10.1016/j.jmatprotec.2012.06.017
14
H. Choe and D.C. Dunand, Mater. Sci. Eng. A, 384; 184 (2004)
10.1016/S0921-5093(04)00814-7
15
B. Kucharczyk, W. Tylus and L. Kepinski, Appl. Catal. B, 49; 27 (2004)
10.1016/j.apcatb.2003.11.006
16
X. Yu, S-T. Tu, Z. Wang and Y. Qi, J. Power Sources, 150; 57 (2005)
10.1016/j.jpowsour.2005.02.027
17
B-H. Kang, J. Park, K. Park and D. Yoo, Korean. J. Mater. Res., 26; 714 (2016)
18
R.A. Patil, C-W. Su, C-J. Chuang, C-C. Lai, Y. Liou and Y-R. Ma, Nanoscale, 8; 12970 (2016)
10.1039/C6NR02531E27304863
19
X. Song and L. Gao, J. Am. Ceram. Soc., 91; 3465 (2008)
10.1111/j.1551-2916.2008.02667.x
20
M.A. Bhosale and B.M. Bhanage, Adv. Powder Technol., 26; 422 (2015)
10.1016/j.apt.2014.11.015
21
K-C. Wang, P-S. Shen, M-H. Li, S. Chen, M-W. Lin, P. Chen and T-F. Guo, ACS Appl. Mater. Interfaces, 6; 11851 (2014)
10.1021/am503610u25054484
22
R. Betancur, M. Maymo, X. Elias, L.T. Vuong and J. Martorell, Sol. Energy Mater. Sol. Cells, 95; 735 (2011)
10.1016/j.solmat.2010.10.014
23
T. Terachi, N. Totsuka, T. Yamada, T. Nakagawa, H. Deguchi, M. Horiuchi and M. Oshitani, J. Nucl. Sci. Technol., 40; 509 (2003)
10.1080/18811248.2003.9715385
24
A. Velon and I. Olefjord, Oxid. Met., 56; 415 (2001)
10.1023/A:1012589315800
25
Q. pang, Z.L. Hu and D.L. Sun, Vacuum, 129; 86 (2016)
10.1016/j.vacuum.2016.04.018
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 28
  • No :6
  • Pages :324-329
  • Received Date : 2018-04-30
  • Revised Date : 2018-05-11
  • Accepted Date : 2018-05-23
  • DOI :https://doi.org/10.3740/MRSK.2018.28.6.324
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close