Zr-7Cu Alloy Design According to Sn Content for Bio-Metallic Materials

Min-Suk Kim; Chung-Seok Kim

doi:10.3740/MRSK.2021.31.12.690

All Issue

2021 Vol.31, Issue 12 Preview Page Next Page

Zr-7Cu Alloy Design According to Sn Content for Bio-Metallic Materials 금속 생체재료를 위한 Sn 함량에 따른 Zr-7Cu 합금설계

December 2021. pp. 690-696

PDF XML

Abstract

The purpose of this study is to develop a zirconium-based alloy with low modulus and magnetic susceptibility to prevent the stress-shielding effect and the generation of artifacts. Zr-7Cu-xSn (x = 1, 5, 10, 15 mass%) alloys are prepared by an arc melting process. Microstructure characterization is performed by microscopy and X-ray diffraction. Mechanical properties are evaluated using micro Vickers hardness and compression test. The magnetic susceptibility is evaluated using a SQUIDVSM. The average magnetic susceptibility value of the Zr-7Cu-xSn alloy is 1.176 × 10^-8 cm³g^-1. Corrosion tests of zirconiumbased alloys are conducted through polarization test. The average Icorr value of the Zr-7Cu-xSn alloy is 0.1912 mA/cm². The elastic modulus value of 14 ~ 18 GPa of the zirconium-based alloy is very similar to the elastic modulus value of 15 ~ 30 GPa of the human bone. Consequently, the Sn added zirconium alloy, Zr-7Cu-xSn, is very interesting and attractive as a biomaterial that reduces the stress-shielding effect caused by differences of elastic modulus between human bone and metallic implants. In addition, this material has the potential to be used in metallic dental implants to effectively eliminate artifacts in MRI images due to low magnetic susceptibility.

Keywords

biomaterials

zirconium

dental implant

elastic modulus

magnetic susceptibility

References

D. D. Kiradzhiyska and R. D. Mantcheva, Folia Med., 61, 34 (2019). 10.2478/folmed-2018-003831237853

K. Miura, N. Yamada, S. Hanada, T.-K. Jung and E. Itoi, Acta Biomater., 7, 2320 (2011). 10.1016/j.actbio.2011.02.00821316491

J.-M. Seo, S. J. Kim, H. Chung, E. T. Kim, H. G. Yu and Y. S. Yu, Mater. Sci. Eng., C, 24, 585 (2004). 10.1016/j.msec.2003.12.001

G. R. Parr, L. K. Gardner and R. W. Toth, J. Prosthet. Dent, 54, 410 (1985). 10.1016/0022-3913(85)90562-1

Y. Okazaki and E. Gotoh, Biomater, 26, 11 (2005). 10.1016/j.biomaterials.2004.02.00515193877

C. Zhang, L. Zhang, L. Liu, L. Lv, L. Gao, N. Liu, X. Wang and J. Ye, J. Orthop. Surg. Res., 15, 40 (2020). 10.1186/s13018-019-1489-y32028970PMC7006186

M. Long and H. J. Rack, Biomater, 19, 1621 (1998). 10.1016/S0142-9612(97)00146-4

S. Nag, R. Banerjee and H. Fraser, Acta Biomater., 3, 369 (2007). 10.1016/j.actbio.2006.08.00517070741

F. Shafiei, E. Honda, H. Takahashi and T. Sasaki, J. Dent. Res., 82, 602 (2003). 10.1177/15440591030820080612885843

10.

T. Ernstberger, G. Heidrich, T. Bruening, S. Krefft, G. Buchhorn and H. M. Klinger, Eur. Spine. J., 16, 179 (2007). 10.1007/s00586-006-0064-516463200PMC2200688

11.

H. D. Kocasarac, G. Ustaoglu, S. Bayrak, R. Katkar, H. Geha and M. Noujeim, Oral Surg. Oral Med. Oral Pathol. Oral Radiol., 128, e161 (2019). 10.1016/j.oooo.2019.01.031

12.

K. T. Park, T. H. Lee, N. C. Jo, H. H. Nersisyan, B. S. Chun, H. H. Lee and J. H. Lee, J. Nucl. Mater., 436, 130 (2013). 10.1016/j.jnucmat.2013.01.310

13.

Y. Yan and Y. Han, Surf. Coat. Technol., 201, 5692 (2007). 10.1016/j.surfcoat.2006.07.058

14.

S. Vadlakonda, R. Banerjee, A. Puthcode and R. Mirshams, Mater. Sci. Eng., A, 434, 372 (2006). 10.1016/j.msea.2006.07.093

15.

C. Wei, L. Luo, Z. Wu, J. Zhang, S. Su and Y. Zhan, J. Mech. Behav. Biomed. Mater., 111, 104017 (2020). 10.1016/j.jmbbm.2020.10401732818772

16.

A. Mehjabeen, T. Song, W. Xu, H. P. Tang and M. Qian, Adv. Eng. Mater., 20, 1800207 (2018). 10.1002/adem.201800207

17.

H. Okamoto, J. Phase Equilib. Diffus., 31, 411 (2010). 10.1007/s11669-010-9734-4

18.

M. Niinomi, Mater. Sci. Eng., A, 243, 231 (1998). 10.1016/S0921-5093(97)00806-X

19.

G. J. Hwang, Master's Thesis (in Korean), p.1, Chosun University, Seoul, Republic of Korea (2018).

20.

Li, Y. Zhan and W. Jiang, Mater. Des., 34, 479 (2012). 10.1016/j.matdes.2011.08.012

21.

J. F. Schenck, Med. Phys., 23, 815 (1996). 10.1118/1.5978548798169

22.

G. P. Arrighini, M. Maestro and R. Moccia, J. Chem. Phys., 49, 882 (1968). 10.1063/1.1670155

23.

W. M. Spees, D. A. Yablonskiy, M. C. Oswood and J. J. H. Ackerman, Magn. Reson. Med., 45, 533 (2001). 10.1002/mrm.107211283978

24.

V. Jain, O. Abdulmalik, K. J. Propert and F. W. Wehrli, Magn. Reson. Med., 68, 863 (2012). 10.1002/mrm.2328222162033PMC3307833

25.

F. Y. Zhou, K. J. Qiu, H. F. Li, T. Huang, B. L. Wang, L. Li and Y. F. Zheng, Acta Biomater., 9, 9578 (2013). 10.1016/j.actbio.2013.07.03523928334

26.

F. Y. Zhou, K. J. Qiu, D. Bian, Y. F. Zheng and J. P. Lin, J. Mater. Sci. Technol., 30, 299 (2014). 10.1016/j.jmst.2013.12.006

27.

M.-J. Kim, Y.-W. Jang, Y.-H. Yoo, J.-J. Kim and J.-G. Kim, J. Korean Electrochem. Soc., 13, 96 (2010). 10.5229/JKES.2010.13.2.096

28.

S. G. S. Charlena and M. Fajar, J. Phys. Conf., 776, 012056 (2016). 10.1088/1742-6596/776/1/012056

29.

J. M. Salman and M. L. Aziz, IQJMME, 19, 138 (2019). 10.32852/iqjfmme.v19i2.312

30.

N. Eliaz, Materials, 12, 407 (2019). 10.3390/ma1203040730696087PMC6384782

31.

Suresh N. Kadam, Kailash R. Jagdeo and M. R. Nair, IRJES, 3, 30 (2014).

32.

R. Xue, D. Wang, D. Yang, L. Zhang, X. Xu, L. Liu and D. Wu, Materials, 13, 5130 (2020). 10.3390/ma1322513033202987PMC7696516

Information

Publisher :Materials Research Society of Korea
Publisher(Ko) :한국재료학회
Journal Title :Korean Journal of Materials Research
Journal Title(Ko) :한국재료학회지
Volume : 31
No :12
Pages :690-696
Received Date : 2021-11-10
Revised Date : 2021-12-07
Accepted Date : 2021-12-07
DOI :https://doi.org/10.3740/MRSK.2021.31.12.690

Korean Journal of Materials Research ISSN:1225-0562(Print) 2287-7258(Online) 한국재료학회지

All Issue