All Issue

2018 Vol.28, Issue 10 Preview Page
Effects of Graphite Shape and Composite Fabricating Method on Mechanical Properties of Graphite/Copper Composites

그라파이트/구리 복합재료의 기계적 특성에 미치는 그라파이트 형상과 복합재료 제조방법의 영향

Youhan Sohn
,
Jun Hyun Han†
손 유한
,
한 준현†
Department of Materials Science and Engineering, Chungnam National University, Daejeon 34134, Republic of Korea
충남대학교 신소재공학과
†Corresponding author E-Mail : jhhan@cnu.ac.kr (J. H. Han, Chungnam Nat’l Univ.)
October 2018. pp. 601-609
PDF XML Citation
Abstract

To study the effects of graphite shape and the composite fabricating method on the mechanical properties of graphite/copper (Gr/Cu) composites, a copper composite using graphite flakes or graphite granules as reinforcing phases is fabricated using mechanical mixing or electroless plating method. The mechanical properties of the Gr/Cu composites are evaluated by compression tests, and the compressive strength and elongation of the Gr/Cu composites using graphite granules as a reinforcing phase are compared with those of Cu composites with graphite flakes as a reinforcing phase. The compressive yield strength or maximum strength of the Gr/Cu composites with graphite granules as a reinforcing phase is higher than that of the composites using graphite flakes as a reinforcing phase regardless of the alignment of graphite. The strength of the composite produced by the electroless plating method is higher than that of the composite material produced by the conventional mechanical mixing method regardless of the shape of the graphite. Using graphite granules as a reinforcing phase instead of graphite flakes improves the strength and elongation of the Gr/Cu composites in all directions, and reduces the difference in strength or elongation according to the direction.

Keywords
graphite/copper composite
heat sink
graphite shape
compression test
electroless plating
References
1.
M. Wissler , J. Power Sources, 156, 142 (2006). 10.1016/j.jpowsour.2006.02.064
2.
C. Zweben , J. Miner. Met. Mater. Soc., 50, 47 (1998). 10.1007/s11837-998-0128-6
3.
Q. Liu , X. B. He, S. B. Ren, C. Zhang, L. Ting-Ting and X. H. Qu, J. Alloy. Comp., 587, 255 (2014). 10.1016/j.jallcom.2013.09.207
4.
X. Si , M. Li, F. Chen, P. Eklund, J. Xue, F. Huang, S. Du and Q. Huang, Mater. Sci. Eng., 708, 311 (2017). 10.1016/j.msea.2017.10.015
5.
D. B. Xiong , M. Cao, Q. Guo, Z. Tan, G. Fan, Z. Li and D. Zhang, Sci. Rep., 6, 33801 (2016). 10.1038/srep3380127647264
6.
J. Shuai , L. Xiong, L. Zhu and W. Li, Compos. Appl. Sci. Manuf., 88, 148 (2016). 10.1016/j.compositesa.2016.05.027
7.
J. F. Silvain , C. Vincent, J. M. Heintz and N. Chandra, Compos. Sci. Tech., 69, 2474 (2009). 10.1016/j.compscitech.2009.06.023
8.
C. P. Samal , J. S. Parihar and D. Chaira, J. Alloy Comp., 569, 95 (2013). 10.1016/j.jallcom.2013.03.122
9.
S. Zhou , S. Chiang, J. Xu, H. Du, B. Li, C. Xu and F. Kang, Carbon, 50, 5052 (2012). 10.1016/j.carbon.2012.06.045
10.
R. Prieto , J. M. Molina, J. Narciso and E. Louis, Scripta Mater., 59, 11 (2008). 10.1016/j.scriptamat.2008.02.026
11.
S. Ren , J. Chen, X. He and X. Qu, Carbon, 127, 412 (2018). 10.1016/j.carbon.2017.11.033
12.
C. Xue , H. Bai, P. F. Tao, J. W. Wang, N. Jiang and S. L. Wang, Mater. Des., 108, 250 (2016). 10.1016/j.matdes.2016.06.122
13.
S. J. Park , T. J. Ko, J. Yoon, M. W. Moon and J. H. Han, Korean J. Mater. Res., 25, 622 (2015).
14.
J. Zheng , W. B. Carlson and J. S. Reed, J. Eur. Ceram. Soc., 15, 479 (1995). 10.1016/0955-2219(95)00001-B
15.
A. Boden , B. Boerner, P. Kusch, I. Firkowska and S. Reich, Nano Letters, 14, 3640 (2014). 10.1021/nl501411g24839860
16.
I. Firkowska , A. Boden, B. Boerner and S. Reich, Nano Lett., 15, 4745 (2015). 10.1021/acs.nanolett.5b0166426083322
17.
A. Simoncini , V. Tagliaferri and N. Ucciardello, Materials, 10, 1226 (2017). 10.3390/ma10111226
18.
S. F. Moustafa , S. A. El-Badry, A. M. Sanad and B. Kieback, Wear, 253, 699 (2002). 10.1016/S0043-1648(02)00038-8
19.
L. Weizhong , N. Zhiliang, L. Ailian and A. Yongliang, Mater. Res., 18, 20 (2015). 10.1590/1516-1439.322014
20.
Z. F. Zhang and Z. M. Sun, Mater. Sci. Eng., 408, 64 (2005). 10.1016/j.msea.2005.07.041
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 28
  • No :10
  • Pages :601-609
  • Received Date : 2018-09-17
  • Revised Date : 2018-09-26
  • Accepted Date : 2018-09-28
  • DOI :https://doi.org/10.3740/MRSK.2018.28.10.601
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close