All Issue

2018 Vol.28, Issue 10 Preview Page
Structural Characterization of CoCrFeMnNi High Entropy Alloy Oxynitride Thin Film Grown by Sputtering

스퍼터링 방법으로 성장한 코발트크롬철망간니켈 고엔트로피 질산화물 박막의 구조특성

Jeongkuk Lee
,
Soon-Ku Hong†
이 정국
,
홍 순구†
Department of Materials Science and Engineering, Chungnam National University, Daejeon 34134, Republic of Korea
충남대학교 신소재공학과
†Corresponding author E-Mail : soonku@cnu.ac.kr (S.-K. Hong, Chungnam Nat’l Univ.)
October 2018. pp. 595-600
PDF XML Citation
Abstract

This study investigates the microstructural properties of CoCrFeMnNi high entropy alloy (HEA) oxynitride thin film. The HEA oxynitride thin film is grown by the magnetron sputtering method using nitrogen and oxygen gases. The grown CoCrFeMnNi HEA film shows a microstructure with nanocrystalline regions of 5~20 nm in the amorphous region, which is confirmed by high-resolution transmission electron microscopy (HR-TEM). From the TEM electron diffraction pattern analysis crystal structure is determined to be a face centered cubic (FCC) structure with a lattice constant of 0.491 nm, which is larger than that of CoCrFeMnNi HEA. The HEA oxynitride film shows a single phase in which constituting elements are distributed homogeneously as confirmed by element mapping using a Cs-corrected scanning TEM (STEM). Mechanical properties of the CoCrFeMnNi HEA oxynitride thin film are addressed by a nano indentation method, and a hardness of 8.13 GPa and a Young’s modulus of 157.3 GPa are obtained. The observed high hardness value is thought to be the result of hardening due to the nanocrystalline microstructure.

Keywords
high entropy alloy
CoCrFeMnNi
oxynitride film
structure
transmission electron microscopy
References
1.
J.-W. Yeh , S.-K. Chen, S.-J. Lin, J.-Y. Gan, T.-S. Chin, T,- T. Shun, C-H. Tsau and S.-Y. Chang, Adv. Eng. Mater. 6, 299 (2004). 10.1002/adem.200300567
2.
C.-J. Tong , Y.-L. Chen, S.-K. Chen, J.-W. Yeh, T.-T. Shun, C.-H. Tsau, S.-J. Lin and S.-Y. Chang, Metall. Mater. Trans., 36, 881 (2005). 10.1007/s11661-005-0283-0
3.
B. Murty , J.-W. Yeh, S. Ranganathan, High-entropy alloys, Butterworth-Heinemann (2014).
4.
B. Gludovatz , A. Hohenwarter, D. Catoor, E.-H. Chang, E.-P. George and R.-O.Ritchie, Science, 345, 1153 (2014). 10.1126/science.125458125190791
5.
Y.-Y. Chen , T. Duval, U.-D. Hung, J.-W. Yeh and H.-C. Shih, Corros. Sci., 47, 2257 (2005). 10.1016/j.corsci.2004.11.008
6.
F. Otto , A. Dlouhv, C. Somsen, H. Bei, G. Eggeler and E. P. George, Acta Mater., 61, 5743 (2013). 10.1016/j.actamat.2013.06.018
7.
J. Y. He , W. H. Liu, H. Wang, X. J. Liu, T. G. Nieh and Z. P. Lu, Acta Mater., 62, 105 (2014). 10.1016/j.actamat.2013.09.037
8.
C.-Y. Hsu , J.-W. Yeh, S.-K. Chen and T.-T. Shun, Metall. Mater. Trans. A, 35, 1465 (2004). 10.1007/s11661-004-0254-x
9.
Z. Li , K.-G. Pradeep, Y. Deng, D. Raabe and C.-C. Tasan, Nature, 534, 227 (2016). 10.1038/nature1798127279217
10.
K. G. Pradeep , C. C. Tasan, M. J. Yao, Y. Deng, H. Springer and D. Raabe, Mater. Sci. Eng., A, 648, 183 (2015). 10.1016/j.msea.2015.09.010
11.
B. Schuh , F.-M. Martin, B. Volker, E. P. George, H. Clemens, R. Pippan and A. Hohenwarter, Acta Meter., 96, 258 (2015). 10.1016/j.actamat.2015.06.025
12.
V. Dolique , A.-L. Thomann, P. Brault, Y. Tessier and P. Gillon, Surf. Coat. Technol., 204, 1989 (2010). 10.1016/j.surfcoat.2009.12.006
13.
Z. F. Wu , X. D. Wang, Q. P. Cao, G. H. Zhao, J. X. Li, D. X. Zhang, J.-J. Zhu and J. Z. Jiang, J. Alloys Compd., 609, 137 (2014). 10.1016/j.jallcom.2014.04.094
14.
P.-C. Lin , C.-Y. Cheng, J.-W. Yeh and T.-S. Chin, Entropy, 18, 308(2016). 10.3390/e18080308
15.
Z. An , H. Jia, Y. Wu, P. D. Rack, A. D. Patchen, Y. Liu, Y. Ren, N. Li and P.K. Liaw, Mater. Res. Lett., 3, 203 (2015). 10.1080/21663831.2015.1048904
16.
L. Xie , P. Brault, A.-L. Thomann, X. Yang, Y. Zhang and G. Shang, Intermetallics, 68, 78 (2016). 10.1016/j.intermet.2015.09.008
17.
C.-S. Han and S.-W. Kim, Korean J. Mater. Res., 28, 159 (2018).27854539
18.
T. K. Chen , T. T. Shun, J. W. Yeh and M. S. Wong, S urf.Coat. Technol., 188-189, 193 (2004). 10.1016/j.surfcoat.2004.08.023
19.
P.-K. Huang and J.-W. Yeh, Thin Solid Films, 518, 180 (2009). 10.1016/j.tsf.2009.06.020
20.
B. Ren , Z. X. Liu, L. Shi, B. Cai and M. X. Wang, Appl. Surf. Sci., 257, 7172 (2011). 10.1016/j.apsusc.2011.03.083
21.
T.-K. Chen and M.-S. Wong, J. Mater. Res., 23, 3075 (2008). 10.1557/JMR.2008.0371
22.
T.-K. Chen , M.-S. Wong, Surf. Coat. Technol., 203, 495 (2008). 10.1016/j.surfcoat.2008.05.023
23.
Y.-S. Huang , L. Chen, H.-W. Lui, M.-H. Cai and J.-W. Yeh, Mater. Sci. Eng., A, 457, 77 (2007). 10.1016/j.msea.2006.12.001
24.
R.-S. Yu , R.-H. Huang, C.-M. Lee and F.-S. Shieu, Appl. Surf. Sci., 263, 58 (2012). 10.1016/j.apsusc.2012.08.109
25.
D.-C. Tsai , M.-J. Deng, Z.-C. Chang, B.-H. Kuo, E.-C. Chen, S.-Y. Chang, F.-S, Shieu, J. Alloy. Comp., 647, 179 (2015). 10.1016/j.jallcom.2015.06.025
26.
B. D. Cullity , S. R. Stock, Elements of X-Ray Diffraction, 3rd ed., Pearson, Upper Saddle River (2001).
27.
B. Cantor , I. T. H. Chang, P. Knight and A. J. B. Vincent, Mater. Sci. Eng., A, 375, 213(2004). 10.1016/j.msea.2003.10.257
28.
H. Najafi , A. Karimi, D. Alexander, P. Dessarzin and M. Morstein, Thin Solid Films, 549, 224 (2013). 10.1016/j.tsf.2013.06.062
29.
H. Hadraba , Z. Chlup, A. Dlouhy, F. Dobes, P. Roupco va,M. Vilemova and J. Matejicek, Mater. Sci. Eng., A, 689, 252 (2017). 10.1016/j.msea.2017.02.068
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 28
  • No :10
  • Pages :595-600
  • Received Date : 2018-09-18
  • Revised Date : 2018-09-27
  • Accepted Date : 2018-09-28
  • DOI :https://doi.org/10.3740/MRSK.2018.28.10.595
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close