Synthesis and Printability of Aqueous Ceramic Ink with Graft Polymer

Ji-Hyeon Lee; Hae-Jin Hwang; Jin-Ho Kim; Kwang-Taek Hwang; Kyu-Sung Han

doi:10.3740/MRSK.2019.29.10.639

All Issue

2019 Vol.29, Issue 10 Preview Page Next Page

Synthesis and Printability of Aqueous Ceramic Ink with Graft Polymer Graft Polymer를 이용한 수계 세라믹 잉크의 합성 및 프린팅 특성평가

October 2019. pp. 639-646

PDF XML

Abstract

Ink-jet printing is a manufacturing process technology that directly prints a digitalized design pattern onto a substrate using a fine ink jetting system. In this study, environmentally friendly yellow aqueous ceramic ink is synthesized by mixture of distilled water, yellow ceramic pigment and additives for ink-jet printing. The graft polymer, which combines electrostatic repulsion and steric hindrance mechanism, is used as a surfactant for dispersion stability of aqueous ceramic ink. Synthesized ceramic ink with graft polymer surfactant shows better dispersion stability than did ceramic ink with PAA surfactant; synthesized ink also shows desirable ink-jet printability with the formation of a single ink droplet during printability test. Finally, ceramic ink printed on glass substrate and ceramic ink with graft polymer surfactant shows a high contact angle without surface treatment on glass substrate. Consequently, it is confirmed that the ceramic ink with graft polymer surfactant can achieve high printing resolution without additional surface treatment process.

Keywords

ceramic ink

contact angle

ink-jet printing

printability

References

P. J. Smith and J. Stringer, Fundamentals of inkjet printing: the science of inkjet and droplets, p.397, S. D. Hoath, John Wiley & Sons, Germany (2016).10.1002/9783527684724.ch15

K. M. Jeong, J. M. Won, Y. K. Lee and K. Koseki, J. Korea TAPPI, 46, 46 (2014).10.7584/ktappi.2014.46.2.046

O. Watanabe, T. Hibino and M. Sakakibara, Qualicer 2012 XII Global Forum on Ceramic Tile, 73, 73 (2012).

L. Creagh, M. McDonald and W. Letendre, Equipment for Electronic Products Manufacturing, 8, 9 (2004).

C. S. Kim, S. J. Park, W. Sim, Y. J. Kim and Y. Yoo, Comput. Fluids, 38, 602 (2009).10.1016/j.compfluid.2008.06.003

Y. Yoshioka, P. D. Calvert and G. E. Jabbour, Macromol. Rapid Commun., 26, 238 (2005).10.1002/marc.200400527

M. He, O. Stoevesandt, E. A. Palmer, F. Khan, O. Ericsson and M. J. Taussig, Nat. Methods, 5, 175 (2008).10.1038/nmeth.117818204456

J. T. Delaney, P. J. Smith and U. S. Schubert, Soft Matter, 5, 4866 (2009).10.1039/b909878j

S. Ilkhanizadeh, A. I. Teixeira and O. Hermanson, Biomater., 28, 3936 (2007).10.1016/j.biomaterials.2007.05.01817576007

10.

H. Kobayashi, M. Matsuoka, M. Nagae, H. Honda, T. Suzuki, K. Ogawa and H. Maeda, Soc. Imaging Sci. Technol., 2, 903 (2008).

11.

M. Singlard, A. Aimable, M. Lejeune, C. Dossou-Yovo, M. Poncelet, R. Noguéra and C. Modes, Powder. Technol., 266, 303 (2014).10.1016/j.powtec.2014.06.044

12.

G. L. Güngör, A. Kara, D. Gardini, M. Blosi, M. Dondi and C. Zanelli, Dyes Pigm., 127, 148 (2016).10.1016/j.dyepig.2015.12.018

13.

E. A. Clark, M. R. Alexander, D. J. Irvine, C. J. Roberts, M. J. Wallace, S. Sharpe, J. Yoo, R. J. M. Hague, C. J. Tuck and R. D. Wildman, Int. J. Pharm., 529, 523 (2017).10.1016/j.ijpharm.2017.06.08528673860

14.

E. Saleh, P. Woolliams, B. Clarke, A. Gregory, S. Greedy, C. Smartt, R. Wildman, I. Ashcroft, R. Hague, P. Dickens and C. Tuck, Addit. Manuf., 13, 143 (2017).10.1016/j.addma.2016.10.002

15.

Z. Pan, Y. Wang, H. Huang, Z. Ling, Y. Dai and S. Ke, Ceram. Int., 41, 12515 (2015).10.1016/j.ceramint.2015.06.124

16.

G. Ferrari and P. Zannini, Bol. Soc. Esp. Ceram. vidr., 56, 226 (2017).10.1016/j.bsecv.2017.04.004

17.

N. F. Morrison and O. G. Harlen, Rheol. acta, 49, 619 (2010).10.1007/s00397-009-0419-z

18.

N. Reis, C. Ainsley and B. Derby, J. Appl. Phys., 97, 094903 (2005).10.1063/1.1888026

19.

A. Friederich, J. R. Binder and W. Bauer, J. Am. Ceram. Soc., 96, 2093 (2013).10.1111/jace.12385

20.

C. P. Whitby, P. J. Scales, F. Grieser, T. W. Healy, G. Kirby, J. A. Lewis and C. F. Zukoski, J. Colloid. Interface Sci., 262, 274 (2003).10.1016/S0021-9797(03)00179-6

21.

D. Kuscer, G. Stavber, G. Trefalt and M. Kosec, J. Am. Ceram. Soc., 95, 487 (2012).10.1111/j.1551-2916.2011.04876.x

22.

H. E. Hoefdraad, J. Inor. Nucl. Chem., 37, 1917 (1975).10.1016/0022-1902(75)80915-8

23.

D. Pawlak, Z. Frukacz, Z. Mierczyk, A. Suchocki and J. Zachara, J. Alloy. Comp., 275, 361 (1998).10.1016/S0925-8388(98)00340-5

24.

G. De, A. Licciulli and M. Nacucchi, J. Non-Crys. Solid., 201, 153 (1996).10.1016/0022-3093(96)00166-4

25.

C. Lemarchand, P. Couvreur, C. Vauthier, D. Costantini and R. Gref, Int. J. Pharm., 254, 77 (2003).10.1016/S0378-5173(02)00687-7

26.

O. Mengual, G. Meunier, I. Cayre, K. Puech and P. Snabre, Talanta, 50, 445 (1999).10.1016/S0039-9140(99)00129-0

27.

J. H. Lee, H. J. Hwang, J. H. Kim, K. T. Hwang and K. S. Han, J. Kor. Ceram Soc., 53, 75 (2016).10.4191/kcers.2016.53.1.75

28.

V. S. Solana, Qualicer, 14, 1 (2014).

29.

J. Stringer and B. Derby, J. Eur. Ceram. Soc., 29, 913 (2009).10.1016/j.jeurceramsoc.2008.07.016

30.

B. Derby, N. Reis, K. A. M. Seerden, P. S. Grant and J. R. G. Evans, MRS Online Proceedings Library Archive, 625, 195 (2000).10.1557/PROC-625-195

31.

N. Reis and B. Derby, MRS Online Proceedings Library Archive, 625, 117 (2000).10.1557/PROC-625-117

Information

Publisher :Materials Research Society of Korea
Publisher(Ko) :한국재료학회
Journal Title :Korean Journal of Materials Research
Journal Title(Ko) :한국재료학회지
Volume : 29
No :10
Pages :639-646
Received Date : 2019-07-23
Revised Date : 2019-08-26
Accepted Date : 2019-09-19
DOI :https://doi.org/10.3740/MRSK.2019.29.10.639

Korean Journal of Materials Research ISSN:1225-0562(Print) 2287-7258(Online) 한국재료학회지

All Issue