Influence of Fluorine-Doped Tin Oxide Coated on NiCrAl Alloy Foam Using Ultrasonic Spray Pyrolysis Deposition

Dong-Yo Shin; Ju-Won Bae; Bon-Ryul Koo; Hyo-Jin Ahn

doi:10.3740/MRSK.2017.27.7.390

All Issue

2017 Vol.27, Issue 7 Preview Page

Influence of Fluorine-Doped Tin Oxide Coated on NiCrAl Alloy Foam Using Ultrasonic Spray Pyrolysis Deposition 초음파 분무 열분해법을 이용한 NiCrAl 합금 폼에 코팅된 불소 도핑된 주석 산화물의 영향

July 2017. pp. 390-395

PDF XML

Abstract

Fluorine-doped tin oxide (FTO) coated NiCrAl alloy foam is fabricated using ultrasonic spray pyrolysis deposition (USPD). To confirm the influence of the FTO layer on the NiCrAl alloy foam, we investigated the structural, chemical, and morphological properties and chemical resistance by using USPD to adjust the FTO coating time (12, 18, and 24 min). As a result, when an FTO layer was coated for 24 min on NiCrAl alloy foam, it was found to have an enhanced chemical resistance compared to those of the other samples. This improvement in the chemical resistance of using USPD NiAlCr alloy foam can be the result of the existence of an FTO layer, which can act as a protection layer between the NiAlCr alloy foam and the electrolyte and also the result of the increased thickness of the FTO layer, which enhances the diffusion length of the metal ion.

Keywords

fluorine-doped tin oxide

NiCrAl alloy foam

ultrasonic spray pyrolysis deposition

surface coating, steam methane reforming

References

Y Lin, L Zhou, J Xu, Z Luo, H Kan, J Zhang, C Yan and J Zhang, Sci. Rep, 7; 40956 (2017)

D Y Sin, G H An and H J Ahn, J. Korean Powd. Metall. Inst, 22; 350 (2015)

D H Oh, H An, B R Koo and H J Ahn, J. Kor. Powd. Metall. Inst, 23; 95 (2016)

S Ayabe, H Omoto, T Utaka, R Kikuchi, K Sasaki, Y Teraoka and K Eguchi, Appl. Catal. A-Gen, 241; 261 (2003)

D Y Sin, E H Lee, M H Park and H J Ahn, Korean J. Mater. Res, 26; 393 (2016)

Y J Lee, B R Koo, S H Baek, M H Park and H J Ahn, Korean J. Mater. Res, 25; 391 (2015)

Y S Oh, H S Roh, K W Jun and Y S Baek, Int. J. Hydrog. Energy, 28; 1387 (2003)

K O Christensen, D Chen, R Lodeng and A Holmen, Appl. Catal. A-Gen, 314; 9 (2006)

S Freni, G Calogero and S Cavallaro, J. Power Sources, 87; 28 (2000)

P Wu, X Li, S Ji, B Lang, F Habimana and C Li, Catal. Today, 146; 82 (2009)

F Yin, S Ji, P Wu, F Zhao, H Liu and C Li, Chemsuschem, 1; 311 (2008)

J G Checmanowski and B Szczygiel, Corros. Sci, 50; 3581 (2008)

T J Nijdam, L P H Jeurgens and W G Sloof, Acta Mater, 53; 1643 (2005)

J M Kim, B R Koo, H J Ahn and T K Lee, Korean J. Mater. Res, 25; 125 (2015)

A I Martinez, L Huerta, J M O-Rueda De Leon, D Acosta, O Malik and M Aguilar, J. Phys. D: Appl. Phys, 36; 5091 (2006)

H R An, H An, D H Riu and H J Ahn, Arch. Metall. Mater, 60; 1241 (2015)

A E Rakhshani, Y Makdisi and H A Ramazaniyan, J. Appl. Phys, 83; 1049 (1998)

G Kishan, L Coulier, V H J de Beer, J A R van Veen and J W Niemantsverdriet, J. Catal, 196; 180 (2000)

M C Biesinger, B P Payne, A P Grosvenor, L W M Lau, A R Gerson and R St C Smart, Appl. Surf. Sci, 257; 2717 (2011)

M E Levin, M Salmeron, A T Bell and G A Somorjai, Surf. Sci, 195; 429 (1988)

Q Pang, Z L Hu and D L Sun, Vacuum, 129; 86 (2016)

J W Bae, B R Koo, H R An and H J Ahn, Ceram. Int, 41; 14668 (2015)

Information

Publisher :Materials Research Society of Korea
Publisher(Ko) :한국재료학회
Journal Title :Korean Journal of Materials Research
Journal Title(Ko) :한국재료학회지
Volume : 27
No :7
Pages :390-395
Received Date : 2017-06-19
Revised Date : 2017-06-25
Accepted Date : 2017-06-26
DOI :https://doi.org/10.3740/MRSK.2017.27.7.390

Korean Journal of Materials Research ISSN:1225-0562(Print) 2287-7258(Online) 한국재료학회지

All Issue