All Issue

2023 Vol.33, Issue 3 Preview Page

Research Paper

Effect of Al on Structural and Magnetic Characteristics of CoCrFeNiMnAlx High Entropy Alloys
Majid Tavoosi1†
,
Ali Ghasemi1
,
Gholam Reza Gordani1
,
Mohammad Reza Loghman Estarki1†
1Department of Materials Engineering, Malek Ashtar University of Technology, Isfahan 83157-13115, Iran
†Corresponding author E-Mail : ma.tavoosi@gmail.com (M. Tavoosi, Malek Ashtar Univ. Technol.) mrlestarki@mut-es.ac.ir (M. R. Loghman Estarki, Malek Ashtar Univ. Technol.)
27 March 2023. pp. 95-100
PDF XML Citation
Abstract

This research examines the effect of adding aluminum on the structural, phasic, and magnetic properties of CoCrFeNiMnAlx high-entropy alloys. To this aim, the arc-melt process was used under an argon atmosphere for preparing cast samples. The phasic, structural, and magnetic properties of the samples were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), and vibrational magnetometry (VSM) analyses. Based on the results, the addition of aluminum to the compound caused changes in the crystalline structure, from FCC solid solution in the CoCrFeNiMn sample to CoCrFeNiMnAl BBC solid solution. It was associated with changes in the magnetic property of CoCrFeNiMnAlx high-entropy alloys, from paramagnetic to ferromagnetic. The maximum saturation magnetization for the CoCrFeNiMnAl casting sample was estimated to be around 79 emu/g. Despite the phase stability of the FCC solid solution with temperature, the solid solution phase formed in the CrCrFeNiMnAl high-entropy compound was not stable, and changed into FCC solid solution with temperature elevation, causing a reduction in saturation magnetization to about 7 emu/g.

Keywords
high-entropy alloys
magnetic properties
mechanical alloying
casting
solid solution
References
1
B. S. Murty, J. W. Yeh and S. Ranganathan, High-entropy alloys, Butterworth-Heinemann (2014). 10.1016/B978-0-12-800251-3.00002-X
2
M. C. Gao, J. W. Yeh, P. K. Liaw and Y. Zhang, High-entropy alloys fundamentals and applications, Springer (2016).
3
Y. Zhang, T. T. Zuo, Z. Tang, M. C. Gao, K. A. Dahmen, P. K. Liaw and Z. P. Lu, Prog. Mater. Sci., 61, 1 (2014). 10.1016/j.pmatsci.2013.10.001
4
X. Yang and Y. Zhang, Mater. Chem. Phys., 132, 233 (2012). 10.1016/j.matchemphys.2011.11.021
5
Y. F. Kao, S. K. Chen, T. J. Chen, P. C. Chu, J. W. Yeh and S. J. Lin, J. Alloys Compd., 509, 1607 (2011). 10.1016/j.jallcom.2010.10.210
6
X. Wang, Y. Zhang, Y. Qiao and G. Chen, Intermetallics, 15, 357 (2007). 10.1016/j.intermet.2006.08.005
7
K. B. Zhang, Z. Y. Fu, J. Y. Zhang, J. Shi, W. M. Wang, H. Wang, Y. C. Wang and Q. J. Zhang, J. Alloys Compd., 502, 295 (2010). 10.1016/j.jallcom.2009.11.104
8
S. G. Ma and Y. Zhang, Mater. Sci. Eng., A, 532, 480 (2012). 10.1016/j.msea.2011.10.110
9
A. J. Zaddach, C. Niu, A. A. Oni, M. Fan, J. M. LeBeau, D. L. Irving and C. C. Koch, Intermetallics, 68, 107 (2016). 10.1016/j.intermet.2015.09.009
10
X. Zhu, X. Zhou, S. Yu, C. Wei, J. Xu and Y. Wang, J. Magn. Magn. Mater., 430, 59 (2017). 10.1016/j.jmmm.2017.01.028
11
P. Li, A. Wang and C. Liu, J. Alloys Compd., 694, 55 (2017). 10.1016/j.jallcom.2016.09.186
12
J. Wang, Z. Zheng, J. Xu and Y. Wang, J. Magn. Magn. Mater., 355, 58 (2014). 10.1016/j.jmmm.2013.11.049
13
P. Yu, L. Zhang, H. Cheng, H. Zhang, M. Ma, Y. Li, G. Li, P. Liaw and R. Liu, Intermetallics, 70, 82 (2016). 10.1016/j.intermet.2015.11.005
14
C. Z. Yao, P. Zhang, M. Liu, G. R. Li, J. Q. Ye, P. Liu and Y.-X. Tong, Electrochim. Acta, 53, 8359 (2008). 10.1016/j.electacta.2008.06.036
15
T. Qi, Y. Li, A. Takeuchi, G. Xie, H. Miao and W. Zhang, Intermetallics, 66, 8 (2015). 10.1016/j.intermet.2015.06.015
16
M. Lucas, D. Belyea, C. Bauer, N. Bryant, E. Michel, Z. Turgut, S. Leontsev, J. Horwath, S. Semiatin and M. McHenry, J. Appl. Phys., 113, 17A923 (2013). 10.1063/1.4798340
17
J. Müssig and N. Graupner, Prog. Adhes. Adhes., 6, 69 (2021). 10.1002/9781119846703.ch4
18
P. Brown and P. Mazumder, Prog. Adhes. Adhes., 6, 709 (2021). 10.1002/9781119846703.ch16
19
C. Della Volpe and S. Siboni, Rev. Adhes. Adhes., 10, 47 (2022).
20
A. Mojtahedi, H. Hokmabady, M. Kouhi and S. Mohammadyzadeh, Compos. Struct., 279, 114794 (2022). 10.1016/j.compstruct.2021.114794
21
M. Ghasemvand, B. Behjat and S. Ebrahimi, J. Adhes., 98, 1 (2022). 10.1080/00218464.2020.1804376
22
S. D. Wani and A. S. Mundada, Int. J. Pharm. Res. Technol., 11, 1 (2021). 10.31838/ijprt/11.01.01
23
A. K. Netam, V. P. Bhargava, R. Singh and P. Sharma, J. Complementary Med. Res., 12, 204 (2021). 10.5455/jcmr.2021.12.02.23
24
N. K. A. Dwijendra, I. Patra, Y. M. Ahmed, Y. M. Hasan, Z. M. Najm, Z. I. A. Mashhadani and A. Kumar, Monatsh. Chem., 153, 873 (2022). 10.1007/s00706-022-02961-5
25
S. Chupradit, A. T. Jalil, Y. Enina, D. A. Neganov, M. S. Alhassan, S. Aravindhan and A. Davarpanah, J. Nanomater., 2021, 1 (2021). 10.1155/2021/3250058
26
K. Hachem, S. A. Jasim, M. E. Al-Gazally, Y. Riadi, G. Yasin, A. T. Jalil, M. M. Abdulkadhm, M. M. Saleh, M. N. Fenjan, Y. F. Mustafa and A. D. Khalaji, J. Chin. Chem. Soc., 69, 512 (2022). 10.1002/jccs.202100507
27
X. Hu, A. H. Derakhshanfard, I. Khalid, A. T. Jalil, M. J. C. Opulencia, R. B. Dehkordi, D. Toghraie, M. Hekmatifar and R. Sabetvand, J. Taiwan Inst. Chem. Eng., 135, 104396 (2022). 10.1016/j.jtice.2022.104396
28
R. O. Saleh, D. O. Bokov, M. N. Fenjan, W. K. Abdelbasset, U. S. Altimari, A. T. Jalil, L. Thangavelu, W. Suksatan and Y. Cao, J. Mol. Liq., 352, 118676 (2022). 10.1016/j.molliq.2022.118676
29
S. Chupradit, M. KM Nasution, H. S. Rahman, W. Suksatan, A. T. Jalil, W. K. Abdelbasset, D. Bokov, A. Markov, I. N. Fardeeva, G. Widjaja, M. N. Shalaby, M. M. Saleh, Y. F. Mustafa, A. Surendar and R. Bidares, Anal. Biochem., 654, 114736 (2022). 10.1016/j.ab.2022.11473635588855
30
I. Raya, S. Chupradit, M. M. Kadhim, M. Z. Mahmoud, A. T. Jalil, A. Surendar, S. T. Ghafel, Y. F Mustafa and A. N. Bochvar, Chin. Phys. B, 31, 016401 (2021). 10.1088/1674-1056/ac3655
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 33
  • No :3
  • Pages :95-100
  • Received Date : 2023-01-25
  • Revised Date : 2023-02-17
  • Accepted Date : 2023-02-19
  • DOI :https://doi.org/10.3740/MRSK.2023.33.3.95
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close