All Issue

2020 Vol.30, Issue 5 Preview Page
Aspect Ratio Behavior of Grinding Particles with Variation of Particle Size by Wet Grinding

습식분쇄에 의한 입자크기 변화에 따른 분쇄입자의 종횡비 거동

Jin Sam Choi†
최 진삼†
School of Materials Science and Engineering, University of Ulsan, Ulsan 44776, Republic of Korea
울산대학교 첨단소재공학부
†Corresponding author E-Mail : jinsamchoi03@gmail.com (J. S. Choi was shifted to the R&D Center of AKI company.)
May 2020. pp. 223-230
PDF XML Citation
Abstract

As a case study on aspect ratio behavior, Kaolin, zeolite, TiO2, pozzolan and diatomaceous earth minerals are investigated using wet milling with 0.3 mm media. The grinding process using small media of 0.3 pai is suitable for current work processing applications. Primary particles with average particle size distribution D50, ~6 μm are shifted to submicron size, D50 ~0.6 μm after grinding. Grinding of particles is characterized by various size parameters such as sphericity as geometric shape, equivalent diameter, and average particle size distribution. Herein, we systematically provide an overview of factors affecting the primary particle size reduction. Energy consumption for grinding is determined using classical grinding laws, including Rittinger’s and Kick’s laws. Submicron size is obtained at maximum frictional shear stress. Alterations in properties of wettability, heat resistance, thermal conductivity, and adhesion increase with increasing particle surface area. In the comparison of the aspect ratio of the submicron powder, the air heat conductivity and the total heat release amount increase 68 % and 2 times, respectively.

Keywords
primary particle
0.3 mm media
shear friction
submicron
aspect ratio
References
1.
M. Fuji, Hyomen Kagaku(in Japanese), 24, 625 (2003). 10.1380/jsssj.24.625
2.
A. Heim, T. P. Olejik, A. Pawlak, Physicochemical Problems Miner. Process., 39, 189 (2005).
3.
I. J. Lim and P. Somasundaran, Powder Technol., 6, 171 (1972). 10.1016/0032-5910(72)80074-3
4.
P. H. Wiersema, A. L. Loeb and J. T. G. Overbeek, J. Colloid Interface Sci., 22, 78 (1966). 10.1016/0021-9797(66)90069-5
5.
P. C. Kapur and D. W. Fuerstenau, Int. J. Miner. Process., 20, 45 (1987). 10.1016/0301-7516(87)90016-0
6.
C. Suryanarayana, Procedia Mater. Sci., 46, 1 (2001). 10.1016/S0079-6425(99)00010-9
7.
V. Deniz and T. Onur, Int. J. Miner. Process., 67, 71 (2002). 10.1016/S0301-7516(02)00041-8
8.
J. Dittmann, E. Koos and N. Willenbacher, J. Am. Ceram. Soc., 96, 391 (2013).
9.
A. Chaudhari, Z. Y. Soh, H. Wang and A. S. Kumar, Int. J. Mach. Tool. Manufact., 133, 47 (2018). 10.1016/j.ijmachtools.2018.05.009
10.
C. Suyanarayana, Prog. Mater. Sci., 46, 1 (2001). 10.1016/S0079-6425(99)00010-9
11.
J. S. Choi, Kr Patent, KR100928044B1 (2009).
12.
J. S. Choi, D. Y. Jeong, D. W. Shin and W. T. Bae, J. Korean Ceram. Soc., 50, 238 (2013). 10.4191/kcers.2013.50.3.238
13.
L. D. Landau and E. M. Lifshitz, Electrodynamics of Continuous Media., p.368, Pergamon, Oxford, England (1960).
14.
K. Yildirim and L. G. Austin, Wear, 218, 15 (1998). 10.1016/S0043-1648(98)00198-7
15.
S. Nomura and T. Tanaka, Powder Technol., 58, 117 (1989). 10.1016/0032-5910(89)80023-3
16.
D. Eskin and S. Voropayev, Min. Eng., 14, 1161 (2001). 10.1016/S0892-6875(01)00134-0
17.
S. G. Malghan, D. B. Minor and L. S. H. Lum, Powder Technol., 67, 201 (1991). 10.1016/0032-5910(91)80156-D
18.
A. Jankovic, W. Valery, and E. Davis, Min. Eng., 17, 1075(2004). 10.1016/j.mineng.2004.06.031
19.
J. B. Rao, G. J. Catherin, I. N. Murthy, D. V. Rao and B. N. Raju, Int. J. Eng. Sci. Technol., 3, 82 (2011). 10.4314/ijest.v3i4.68544
20.
L. G. Austin, K. Shoji and P. T. Luckie, Powder Technol., 14, 71 (1976). 10.1016/0032-5910(76)80009-5
21.
J. K. Lee, Mechanical Grinding of Inorganic Raw Materials (in Korean), p.361, Bando Press, Seoul (1990).
22.
C. Frances and C. Laguerie, Powder Technol., 99, 147 (1998). 10.1016/S0032-5910(98)00098-9
23.
L. Takacs and J. S. McHenry, Mater. Sci., 41, 5246 (2006). 10.1007/s10853-006-0312-4
24.
J. A. Herbst and D. W. Fuerstenau, Trans. AIME Met. Pet. Eng., 252, 169 (1972).
25.
H. L. Lee, C. J. Jung, K. C. Park, Unit Operation (in Korean), p. 162, Bando Press, Seoul (1983).
26.
P. W. Cleary, Int. J. Miner. Process, 63, 79 (2001). 10.1016/S0301-7516(01)00037-0
27.
L. A. Vermeulen, Powder Technol., 46, 281 (1986). 10.1016/0032-5910(86)80038-9
28.
H. J. Fecht, E. Hellstern, Z. Fu, and W. L. Johnson, Sym. Int. Sci. Eng., 21, 2333 (1990). 10.1007/BF02646980
29.
M. Hosokawa, Nanoparticle Technology Handbook, ed. K. Nogi, M. Naito and T. Yokoyama, p.8, Elsevier, Amsterdam, Netherlands (2007).
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 30
  • No :5
  • Pages :223-230
  • Received Date : 2019-04-05
  • Revised Date : 2019-07-19
  • Accepted Date : 2019-07-22
  • DOI :https://doi.org/10.3740/MRSK.2020.30.5.223
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close