Synthesis and Characterization of Silica Composite for Digital Light Processing

Jin-Wook Lee; Sahn Nahm; Kwang-Taek Hwang; Jin-Ho Kim; Ung-Soo Kim; Kyu-Sung Han

doi:10.3740/MRSK.2019.29.1.23

All Issue

2019 Vol.29, Issue 1 Preview Page Next Page

Synthesis and Characterization of Silica Composite for Digital Light Processing 광경화 3D 프린팅 공정을 위한 실리카 복합소재 합성 및 특성 분석

January 2019. pp. 23-29

PDF XML

Abstract

Three-dimensional(3D) printing is a process for producing complex-shaped 3D objects by repeatedly stacking thin layers according to digital information designed in 3D structures. 3D printing can be classified based on the method and material of additive manufacturing process. Among the various 3D printing methods, digital light processing is an additive manufacturing technique which can fabricate complex 3D structures with high accuracy. Recently, there have been many efforts to use ceramic material for an additive manufacturing process. Generally, ceramic material shows low processability due to its high hardness and strength. The introduction of additive manufacturing techniques into the fabrication of ceramics will improve the low processability and enable the fabrication of complex shapes and parts. In this study, we synthesize silica composite material that can be applied to digital light processing. The rheological and photopolymeric properties of the synthesized silica composite are investigated in detail. 3D objects are also successfully produced using the silica composite and digital light processing.

Keywords

3D printing

silica composite

digital light processing

photopolymerization

additive manufacturing

References

E. Dörre and H. Hübner, Mater. Des., 7, 278, (1986).

R. Janssen, S. Scheppokat and N. Claussen, J. Eur. Ceram. Soc., 28, 1369 (2008). 10.1016/j.jeurceramsoc.2007.12.022

L. Ferrage, G. Bertrand, P. Lenormand, D. Grossin and B. Ben-Nissan, J. Aust. Ceram. Soc., 53, 11 (2016). 10.1007/s41779-016-0003-9

R. He, W. Liu, Z. Wu, D. An, M. Huang, H. Wu, Q. Jiang, X. Ji, S. Wu and Z. Xie, Ceram. Int., 44, 3412 (2018). 10.1016/j.ceramint.2017.11.135

C. J. Bae and J. W. Halloran, Int. J. Appl. Ceram. Technol., 8, 1289 (2011). 10.1111/j.1744-7402.2010.02578.x

C. Exposito Corcione, A. Greco, F. Mongagna, A. Liccuiulli and A. Maffezzoli, J. Mater. Sci., 40, 4899 (2005). 10.1007/s10853-005-3888-1

G. A, Brady and J. W. Halloran, Rapid Prototyp. J., 3, 61 (1997). 10.1108/13552549710176680

M. L. Griffith and W. Halloran, J. Am. Ceram. Soc., 79, 2601 (1996). 10.1111/j.1151-2916.1996.tb09022.x

J. S. Yun, T. W. Park, Y. H. Jeong and J. H. Cho, Appl. Phys. A, 122, 629 (2016). 10.1007/s00339-016-0157-x

10.

S. K. Song, J. H. Kim, K. S. Hwang and K. R. Ha, Korean Chem., 49, 181 (2011). 10.9713/kcer.2011.49.2.181

11.

Z. Chen, D. Li, W. Zhou and L Wang, Proc IME B J Eng Manufact., 224, 641 (2010). 10.1243/09544054JEM1751

12.

C. Hinczewski, S. Corbel and T. Chartier, J. Eur. Ceram. Soc., 18, 583 (1998). 10.1016/S0955-2219(97)00186-6

13.

K. C. Wu and J. W. Halloran, J. Mater. Sci., 40, 71 (2005). 10.1007/s10853-005-5689-y

14.

T. Chartier, A. Badev, Y. Abouliatim, P. Lebaudy and L. Lecamp, J. Eur. Ceram. Soc., 32, 1625 (2012). 10.1016/j.jeurceramsoc.2012.01.010

15.

J. D. Cho, H. T. Ju and J. W. Hong, J. Polym. Sci., Part A: Polym. Chem., 43, 658 (2005). 10.1002/pola.20529

Information

Publisher :Materials Research Society of Korea
Publisher(Ko) :한국재료학회
Journal Title :Korean Journal of Materials Research
Journal Title(Ko) :한국재료학회지
Volume : 29
No :1
Pages :23-29
Received Date : 2018-07-10
Revised Date : 2018-10-12
Accepted Date : 2018-12-04
DOI :https://doi.org/10.3740/MRSK.2019.29.1.23

Korean Journal of Materials Research ISSN:1225-0562(Print) 2287-7258(Online) 한국재료학회지

All Issue