All Issue

2021 Vol.31, Issue 9 Preview Page
Single Crystal Growth Behavior in High-Density Nano-Sized Aerosol Deposited Films
Ji-Ho Lim1
,
Seung-Wook Kim1
,
Samjung Kim1
,
Eun-Young Kang1
,
Min Lyul Lee23
,
Sneha Samal4
,
Dae-Yong Jeong1†
1Dept. of Materials Science and Engineering, Inha University, 100 Inha-ro, Michuhol-gu, Incheon, 22212 Republic of Korea
2Program in Metal·Materials Process Engineering, Inha University, 100 Inha-ro, Michuhol-gu, Incheon, 22212 Republic of Korea
3DAHA SYSTEMS, 166 LS-ro, Gunpo-si, Gyeonggi-do, 15807 Republic of Korea
4Institute of Physics of the Czech Academy of Sciences, Na Slovance 1999/2, 182 00 Praha 8, Czech Republic
†Corresponding author E-Mail : dyjeong@inha.ac.kr (D.-Y. Jeong, Inha Univ.)
September 2021. pp. 488-495
PDF XML Citation
Abstract

Solid state grain growth (SSCG) is a method of growing large single crystals from seed single crystals by abnormal grain growth in a small-grained matrix. During grain growth, pores are often trapped in the matrix and remain in single crystals. Aerosol deposition (AD) is a method of manufacturing films with almost full density from nano grains by causing high energy collision between substrates and ceramic powders. AD and SSCG are used to grow single crystals with few pores. BaTiO3 films are coated on (100) SrTiO3 seeds by AD. To generate grain growth, BaTiO3 films are heated to 1,300 °C and held for 10 h, and entire films are grown as single crystals. The condition of grain growth driving force is ΔGmax < ΔGc ≤ ΔGseed. On the other hand, the condition of grain growth driving force in BaTiO3 AD films heat-treated at 1,100 and 1,200 °C is ΔGc < ΔGmax, and single crystals are not grown.

Keywords
aerosol deposition
single crystal growth
solid state grain growth
References
1.
S.-J. L. Kang, J.-H. Park, S.-Y. Ko and H.-Y. Lee, J. Am. Ceram. Soc., 98, 347 (2015). 10.1111/jace.13420
2.
P. G. Le, T. L. Pham, D. T. Nguyen, J.-S. Lee, J. G. Fisher, H.-P. Kim and W. Jo, J. Asian Ceram. Soc., 9, 63 (2021). 10.1080/21870764.2020.1847426
3.
X. Jiang, J. Kim and K. Kim, Crystals, 4, 351 (2014). 10.3390/cryst4030351
4.
T. Zhang, J. Ou-Yang, X. Yang, W. Wei and B. Zhu, Electron. Mater. Lett., 15, 1 (2019). 10.1007/s13391-018-0091-5
5.
S. Pyo, J. Kim, H. Kim and Y. Roh, Sensor. Actuator. Phys., 283, 220 (2018). 10.1016/j.sna.2018.09.066
6.
T. Yamamoto and T. Sakuma, J. Am. Ceram. Soc., 77, 1107 (1994). 10.1111/j.1151-2916.1994.tb07281.x
7.
D. Lee, H. Vu, H. Sun, T. L. Pham, D. T. Nguyen, J.- S. Lee and J. G. Fisher, Ceram. Int., 42, 18894 (2016). 10.1016/j.ceramint.2016.09.038
8.
E. Uwiragiye, M. U. Farooq, S.-H. Moon, T. L. Pham, D. T. Nguyen, J.-S. Lee and J. G. Fisher, J. Eur. Ceram. Soc., 37, 4597 (2017). 10.1016/j.jeurceramsoc.2017.06.015
9.
J. G. Fisher, A. Bencan and M. Kosec, J. Am. Ceram. Soc., 91, 1503 (2008). 10.1111/j.1551-2916.2008.02324.x
10.
A. Ikesue, Y. L. Aung, T. Yoda, S. Nakayama and T. Kamimura, Opt. Mater., 29, 1289 (2007). 10.1016/j.optmat.2005.12.013
11.
P. G. Le, H. T. Tran, J.-S. Lee, J. G. Fisher, H.-P. Kim, W. Jo and W.-J. Moon, J. Adv. Ceram., 10, 40145-1 (2021).
12.
M.-S. Kim, J. G. Fisher, S.-J. L. Kang and H.-Y. Lee, J. Am. Ceram. Soc., 89, 1237 (2006). 10.1111/j.1551-2916.2005.00883.x
13.
P. W. Rehrig, G. L. Messing and S. Trolier-McKinstry, J. Am. Ceram. Soc., 83, 2654 (2000). 10.1111/j.1151-2916.2000.tb01610.x
14.
D. Hanft, J. Exner, M. Schubert, T. Stocker, P. Fuierer and R. Moos, J. Ceram. Sci. Technol., 6, 147 (2015).
15.
S. Choi, D.-Y. Jeong and H. Kim, Adv. Appl. Ceram., 117, 328 (2018). 10.1080/17436753.2017.1422332
16.
J. Akedo, Mater. Sci. Forum, 43, 449 (2004). 10.4028/www.scientific.net/MSF.449-452.43
17.
J. Akedo and M. Lebedev, Jpn. J. Appl. Phys., 40, 5528 (2001). 10.1143/JJAP.40.5528
18.
D.-M. Chun and S.-H. Ah, Acta Mater., 59, 2693 (2011). 10.1016/j.actamat.2011.01.007
19.
J.-J. Park, M.-W. Lee, S. S. Yoon, H.-Y. Kim, S. C. James, S. D. Heister, S. Chandra, W.-H. Yoon, D.-S. Park and J. Ryu, J. Therm. Spray Technol., 20, 514 (2011). 10.1007/s11666-010-9542-8
20.
J.-J. Choi, J. Ryu, B.-D. Hahn, W.-H. Yoon, B.-K. Lee and D.-S. Park, J. Mater. Sci., 44, 843 (2009). 10.1007/s10853-008-3132-x
21.
J.-M. Oh and S.-M. Nam, Thin Solid Films, 518, 6531 (2010). 10.1016/j.tsf.2010.03.159
22.
J. Ryu, B.-D. Hahn, J.-J. Choi, W.-H. Yoon, K.-Y. Kim, H.-S. Yun and D.-S. Park, Appl. Catal., B, 83, 1 (2008). 10.1016/j.apcatb.2008.01.020
23.
J. L. M. Rupp, A. Infortuna and L. J. Gauckler, Acta Mater., 54, 1721 (2006). 10.1016/j.actamat.2005.11.032
24.
T. Uchikoshi, T. S. Suzuki and Y. Sakka, J. Eur. Ceram. Soc., 30, 1171 (2010). 10.1016/j.jeurceramsoc.2009.06.025
25.
J.-H. Lim, C.-K. Park, Y. S. Lee, Y. M. Kong, K. H. Kang, H. S. Kim and D.-Y. Jeong, Korean J. Met. Mater., 54, 164 (2016). 10.3365/KJMM.2016.54.3.164
26.
J.-S. Lee, S. Yoon, J.-H. Lim, C.-K. Park, J. Ryu and D.- Y. Jeong, Korean J. Mater. Res., 29, 73 (2019). 10.3740/MRSK.2019.29.2.73
27.
E. B. Slamovich and F. E. Lange, J. Am. Ceram. Soc., 75, 2498 (1992). 10.1111/j.1151-2916.1992.tb05603.x
28.
J. G. Fisher, H. Sun, Y.-G. Kook, J.-S. Kim and P. G. Le, J. Magn. Magn. Mater., 416, 384 (2016). 10.1016/j.jmmm.2016.04.079
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 31
  • No :9
  • Pages :488-495
  • Received Date : 2021-08-10
  • Revised Date : 2021-09-02
  • Accepted Date : 2021-09-02
  • DOI :https://doi.org/10.3740/MRSK.2021.31.9.488
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close