All Issue

2018 Vol.28, Issue 3 Preview Page
High Temperature Ablation Behaviors of Multilayer Coated Stainless Steel

다층 코팅된 Stainless Steel의 고온 내삭마특성

Kwangsu Choi
,
Wonchul Yang
,
Yeong joo Kim
,
Joon Sik Park†
,
Min Kyu Kim††
최 광수
,
양 원철
,
김 영주
,
박 준식†
,
김 민규††
Department of Materials Science and Engineering, Hanbat National University, Daejeon 34158, Republic of Korea
한밭대학교 신소재공학과
†Corresponding author : jsphb@hanbat.ac.kr (J. S. Park, Hanbat Nat’l Univ.) hykim1207@hanbat.ac.kr (M. K. Kim, Hanbat Nat’l Univ.)
March 2018. pp. 135-141
PDF XML Citation
Abstract

Stainless steel is being used in various industries such as automobile and aerospace for its cheap manufacturing cost and excellent mechanical properties. However, stainless steel failed to stably protect a specimen with a Cr2O3 protective layer at temperatures above 1000 °C. Thus, improving the high temperature flame resistance of the specimen through additional surface coating was needed. In this study, multilayer coatings of YSZ and Al2O3 were performed on SUS 304 specimens using pack cementation coatings and thermal plasma spray. The multilayer coated specimen showed enhanced thermal properties due to the coated layers. The microstructures and phase stability are discussed together with flame conditions at 1350 °C.

Keywords
pack cementation coatings
thermal plasma coatings
YSZ
References
1
F.J. Perez, M.J. Cristobal, M.P. Hierro and F. Pedraza, Surf. Coat. Tech., 120; 442 (1999)
10.1016/S0257-8972(99)00503-4
2
F.J. Perez, M.P. Hierro, F. Pedraza, C. Homez and M.C. Carpintero, Surf. Coat. Tech., 120; 151 (1999)
10.1016/S0257-8972(99)00355-2
3
F. Riffard, H. Buscail, E. Caudron, R. Cueff, C. Issartel and S. Perrier, Appl. Surf. Sci., 252; 3697 (2006)
10.1016/j.apsusc.2005.05.054
4
S. Sharafi and M.R. Farhang, Surf. Coat. Tech., 200; 5048 (2006)
10.1016/j.surfcoat.2005.05.024
5
N.V. Bangaru and R.C. Krutenat, J. Vac. Sci. Technol. B, 2; 806 (1984)
10.1116/1.582882
6
M. Zandrahimi, J. Vatandoost and H. Ebrahimifar, J. Mater. Eng. Perform., 21; 2074 (2012)
10.1007/s11665-012-0135-1
7
L. Kevin, NACE InternationalOrlando, Florida (2013)
8
M. Chen, W. Li, M. Shen, S. Zhu and F. Wang, Corros. Sci., 82; 316 (2014)
10.1016/j.corsci.2014.01.033
9
P-H. Gao, S-T. Cao, J-P. Li, Z. Yang and Y-C. Guo, J. Alloys Compd., 684; 188 (2016)
10.1016/j.jallcom.2016.05.181
10
B. Bernard, A. Quet, L. Bianchi, A. Joulia, A. Malie, V. Schick and B. Remy, Surf. Coat. Tech., 318; 122 (2017)
10.1016/j.surfcoat.2016.06.010
11
Y.I. Son, C.H. Chung, R.R. Gowkanapalli, C.H. Moon and J.S. Park, Met. Mater. Int., 21; 1 (2015)
10.1007/s12540-015-1001-0
12
M. Qiao and C. Zhou, Surf. Coal Technol., 206; 2899 (2012)
10.1016/j.surfcoat.2011.12.019
13
K. Kothari, R. Radhakrishnan and N.M. Werely, Prog. Aerosp. Sci., 55; 1 (2012)
10.1016/j.paerosci.2012.04.001
14
J.S. Park, J.M. Kim, H.Y. Kim, S. Yi and J.H. Perepezko, Met. Mater. Int., 14; 1 (2008)
10.3365/met.mat.2008.02.001
15
J. Cheng, S. Yi and J.S. Park, Int. J. Refract. Met. Hard Mater., 41; 103 (2013)
10.1016/j.ijrmhm.2013.02.010
16
J.S. Park, J.M. Kim, H.Y. Kim, J.S. Lee, I.H. Oh and C.S. Kang, Mater. Trans., 49; 1048 (2008)
10.2320/matertrans.MC200709
17
J.S. Park, J.M. Kim, S.H. Cho, Y.I. Son and D. Kim, Mater. Trans., 54; 1517 (2013)
10.2320/matertrans.M2013065
18
S-Y. Lee, O-H. Kim, B. Yeh and C-O. Park, Korean. J. Mater. Res., 5; 835 (1995)
19
Y.I. Son and J.S. Park, Trends in Metals &. Mater. Des., 28; 10 (2015)
20
D.W. Parker, Mater. Des., 13; 345 (1992)
10.1016/0261-3069(92)90005-3
21
R. Ghasemi and H. Vakilifard, Ceram. Int., 43; 8556 (2017)
10.1016/j.ceramint.2017.03.074
22
M.R. Loghman-Estarki, R.S. Razvi, H. Edris, M. Pourbafrany, H. Jamali and R. Ghasemi, Ceram. Int., 40; 1405 (2014)
10.1016/j.ceramint.2013.07.023
23
P. Sokolowski, S. Bjorklund, R. Musalek, R.T. Candidato Jr, L. Pawlowski, B. Nait-Ali and D. Smith, Surf. Coat. Tech., 318; 28 (2017)
10.1016/j.surfcoat.2017.02.054
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 28
  • No :3
  • Pages :135-141
  • Received Date : 2017-12-21
  • Revised Date : 2018-02-05
  • Accepted Date : 2018-02-06
  • DOI :https://doi.org/10.3740/MRSK.2018.28.3.135
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close