All Issue

2022 Vol.32, Issue 5 Preview Page
Influence of Inhibitors on the Corrosion of Al and Al-composites in Chloride-containing Solutions - A Review
Neeraj Kumar12*
,
Ashok K. Srivastava2
,
Prabhat Gautam3
,
M. K. Manoj1†*
1Department of Metallurgical and Materials Engineering, NIT Raipur, Raipur 492010, India
2Department of Metallurgical Engineering, SOE, O.P. Jindal University, Raigarh 496109, India
3Department of Chemistry, CMR Institute of Technology, Bengaluru 560037, India
†Corresponding author E-Mail : mkmanoj.mme@nitrr.ac.in (M. K. Manoj, NIT)
May 2022. pp. 280-286
PDF XML Citation
Abstract

Corrosion is a natural, inevitable process, and is one of the world's most serious problems. Losses incurred due to corrosion are extremely expensive for society. Several technological strategies have been explored and implemented to address these losses. The use of inhibitors to prevent corrosion is a common and efficient method to reduce corrosion losses. This review covers Al and Al-composite corrosion inhibitors in chloride-containing solutions, because of their popularity in a broad array of industrial applications. A vast number of studies in the literature detail the common tendency of Al and Al-composites with reinforcements to deteriorate. Accordingly, it is worthwhile to employ inhibitors to protect them, as discussed in the present work. The emphasis is on selecting the smartest corrosion inhibitor and evaluating its performance. According to the study, the most commonly used corrosion inhibitors are 1,4-naphthoquinone (NQ), 1,5-naphthalene diol, 3-amino-1,2,4-triazole-5-thiol (ATAT), ammonium tetrathiotungstate, clotrimazole, amoxicillin, antimicrobial and antifungal drugs. Electrochemical impedance spectroscopy (EIS), potentiodynamic (PDP), and weight loss were among the most commonly used modern electrochemical technologies to test inhibitors’ efficacy under environmental conditions.

Keywords
inhibitors
aluminum
composites
drug
References
1.
A. R. Prasad, A. Kunyankandy and A. Joseph, Corrosion Inhibition in Oil and Gas Industry, p.135, Wiley, New York (2020).
2.
A. M, El-Sherik, Trends in Oil and Gas Corrosion Research and Technologies, p. 3, Woodhead Publishing (2017).
3.
R. Arrabal, B. Mingo, A. Pardo, M. Mohedano, E. Matykina and I. Rodriguez, Corros. Sci., 73, 342 (2013). 10.1016/j.corsci.2013.04.023
4.
P. K. Gupta and R. Srivastava, Mater. Today: Proc., 5, 18761 (2018). 10.1016/j.matpr.2018.06.223
5.
N. Kumar, A. Gautam, R. S. Singh and M. K. Manoj, Trans. Indian Inst. Met., 72, 2495 (2019). 10.1007/s12666-019-01717-w
6.
N. Kumar, and M. Manoj, Met. Mater. Int., 27, 4120 (2021). 10.1007/s12540-020-00814-6
7.
C. Chen and F. Mansfeld, Corros. Sci., 39, 1075 (1997). 10.1016/S0010-938X(97)00008-5
8.
S. Lin, H. Greene, H. Shih and F. Mansfeld, Corrosion, 48, 61 (1992). 10.5006/1.3315920
9.
F. Mansfeld, S. Lin, S. Kim and H. Shih, Corrosion, 45, 615 (1989). 10.5006/1.3579314
10.
S. Cui, J. Han, Y. Du and W. Li, Surf. Coat. Technol., 201, 5306 (2007). 10.1016/j.surfcoat.2006.07.126
11.
A. Sharma and B. Ahn, Appl. Surf. Sci., 550, 149335 (2021). 10.1016/j.apsusc.2021.149335
12.
A. Sharma and B. Ahn, Korean J. Mater. Res., 28, 691 (2018). 10.3740/MRSK.2018.28.12.691
13.
A. Gautam, P. Komal, P. Gautam, A. Sharma, N. Kumar and J. P. Jung, Metals, 11, 329 (2021). 10.3390/met11020329
14.
N. Kumar, P. Chamoli, M. Misra, M. K. Manoj and A. Sharma, Nanoscale, 14, 3987 (2022). 10.1039/D1NR07643D35244647
15.
S. B. Lyon, Corrosion of Noble Metals, p.2205-2223, Elsevier, University of Manchester, UK (2010).
16.
M. Osman, Mater. Chem. Phys., 71, 12 (2001). 10.1016/S0254-0584(00)00510-1
17.
M. Gobara, A. Baraka, R. Akid and M. Zorainy, RSC Adv., 10, 2227 (2020). 10.1039/C9RA09552G35494587PMC9048839
18.
O. Fayomi and I. Akande, J. Bio- Tribo-Corros., 5, 1 (2019). 10.1007/s40735-018-0196-2
19.
A. Yurt, G. Bereket and C. Ogretir, J. Mol. Struct., 725, 215 (2005). 10.1016/j.theochem.2005.01.048
20.
R. Solmaz, G. Kardas, B. Yazıcı and M. Erbil, Corros. Eng., Sci. Technol., 2, 186 (2008). 10.1179/174327807X214770
21.
N. A. Negm, M. A. Yousef and S. M. Tawfik, Recent Pat. Corros. Sci., 3, 58 (2013). 10.2174/2210683911303010007
22.
M. Becker, Corros. Rev., 37, 321 (2019). 10.1515/corrrev-2019-0032
23.
V. S. Saji, Recent Pat. Corros. Sci., 2, 63 (2011). 10.2174/2210683911101010063
24.
R. W. Revie and Herbert H. Uhlig, Corrosion and Corrosion Control: An Introduction to Corrosion Science and Engineering, 4th ed., p.43-51, John Wiley & Sons (2008). 10.1002/9780470277270
25.
L. Hihara and R. Latanision, Corrosion, 48, 48 (1992). 10.5006/1.3315972
26.
T. M. Yue, Y. Wu and H. C. Man, J. Mater. Sci. Lett., 19, 1003 (2000). 10.1023/A:1006745028307
27.
N. Kumar, M. K. Manoj and M. K. Phani, Mater. Sci. Res. India, 15, 91 (2018). 10.13005/msri/150111
28.
N. Kumar, M. K. Manoj and R. Haldar, J. Mater. Sci. Nanotechnol., 4, 202 (2016).
29.
N. Kumar, D. Dwivedi, A. Sharma, B. Ahn and M. K. Manoj, J. Mater. Res. Express, 6, 126554 (2019). 10.1088/2053-1591/ab5458
30.
K. Xhanari and M. Finsgar, Arab. J. Chem., 8, 12 (2019).
31.
R. W. Revie, Uhlig's Corrosion Handbook, p.51, John Wiley & Sons, New Jersey, United States (2011).
32.
F. Mansfeld, ASM handbook, p.446-462, Stephen D. Cramer, ASM handbook, Ohio, USA (2003).
33.
D. Ho, N. Brack, J. Scully, T. Markley, M. Forsyth and B. Hinton, J. Electrochem. Soc., 9, 53 (2006).
34.
I. Recloux, F. Andreatta, M. E. Druart, L.-B. Coelho, C. Cepek, D. Cossement, L. Fedrizzi and M.-G. Olivier, J. Alloys Compd., 735, 2512 (2018). 10.1016/j.jallcom.2017.11.346
35.
W. W. Nik, O. Sulaiman, S. E. Giap and R. Rosliza, Int. J. Technol., 1, 20 (2010).
36.
I. Obot, N. Obi-Egbedi and S. Umoren, Corros. Sci., 51, 1868 (2009). 10.1016/j.corsci.2009.05.017
37.
E.-S. M. Sherif, J. A. Mohammed, H. S. Abdo and A. A. Almajid, Int. J. Electrochem. Sci., 11, 1355 (2016).
38.
M. Misra, S. R. Chowdhury and T. I. Lee, Appl. Catal., B, 272, 118991 (2020). 10.1016/j.apcatb.2020.118991
39.
M. Misra, S. R. Chowdhury, N. Singh and M. K. Nayak, Electrochim. Acta, 341, 135943 (2020). 10.1016/j.electacta.2020.135943
40.
E.-S. M. Sherif and S.-M. Park, J. Electrochem. Soc., 152, B205 (2005). 10.1149/1.1914752
41.
E.-S. M. Sherif, Int. J. Electrochem. Sci., 7, 4847 (2012).
42.
M. Abdallah, O. A. Hazazi, A. Fawzy, S. El-Shafei and A. S. Fouda, Prot. Met. Phys. Chem. Surf., 50, 659 (2014). 10.1134/S2070205114050025
43.
H. M. Zakaria, Ain Shams Eng. J., 5, 831 (2014). 10.1016/j.asej.2014.03.003
44.
P. C. R. Nunes and L. Ramanathan, Corrosion, 51, 610 (1995). 10.5006/1.3293621
45.
A. S. Verma and N. M. Suri, Mater. Today: Proc., 2, 2840 (2015). 10.1016/j.matpr.2015.07.299
46.
N. K. Verma, Mater. Sci. Res. India, 11, 146 (2014). 10.13005/msri/110207
47.
A. Sharma, H. Lee and B. Ahn, Powder Metall., 64, 192 (2021). 10.1080/00325899.2021.1899453
48.
A. Sharma and S. Das, Mater. Des., 30, 3900 (2009). 10.1016/j.matdes.2009.03.022
49.
B. R. W. Hinton, J. Alloys Compd., 180, 15 (1992). 10.1016/0925-8388(92)90359-H
50.
A. K. Mishra and R. Balasubramaniam, Corros. Sci., 49, 1027 (2007). 10.1016/j.corsci.2006.06.026
51.
I. Aziz, Z. Qi and X. Min, Chin. J. Aeronaut., 22, 670 (2009). 10.1016/S1000-9361(08)60157-0
52.
S. C. Tjong and H. Huo, J. Mater. Eng. Perform., 18, 88 (2009). 10.1007/s11665-008-9264-y
53.
D. Arnott, B. Hinton and N. Ryan, Corrosion, 45, 12 (1989). 10.5006/1.3577880
54.
L. Wilson and B. R. W. Hinton, International Patent, PTC South Melbourne, p. 54-57 (1988).
55.
Y. Zamri, J. Shamsul and K. Ahmad, Proceedings of the National Metallurgical Conference, p.128, Kangar, Perlis, Malaysia (2006).
56.
W. Xue, X. Wu, X. Li and H. Tian, J. Alloys Compd., 425, 302 (2006). 10.1016/j.jallcom.2006.01.035
57.
J. Y. Oh, J.-M. Yu, S. R. Chowdhury, T. I. Lee and M. Misra, Electrochim. Acta, 298, 694 (2019). 10.1016/j.electacta.2018.12.088
58.
C. Monticelli, F. Zucchi, G. Brunoro and G. Trabanelli, J. Appl. Electrochem., 27, 325 (1997). 10.1023/A:1018436931465
59.
A. Fouda, A. Al-Sarawy, F. S. Ahmed and H. El-Abbasy, Prot. Met. Phys. Chem. Surf., 45, 635 (2009). 10.1134/S2070205109050244
60.
M. Abdallah and B. A. A. Jahdaly, Int. J. Electrochem. Sci., 10, 9808 (2015).
61.
N. Raghavendra and J. I. Bhat, J. Phys. Sci., 29, 77 (2018). 10.21315/jps2018.29.1.6
62.
I. Obot, N. Obi-Egbedi and S. Umoren, Int. J. Electrochem. Sci, 4, 863 (2009).
63.
S. Tamborim, S. Dias, S. Silva, L. Dick and D. Azambuja, Corros. Sci., 53, 1571 (2011). 10.1016/j.corsci.2011.01.034
64.
S. Leekha, C. L. Terrell and R. S. Edson, Mayo Clin. Proc., 86, 156 (2011). 10.4065/mcp.2010.063921282489PMC3031442
65.
K. Brown, Pharmaceutical Historian, 34, 37 (2004).
66.
M. Abdallah, Corros. Sci., 46, 1981 (2004). 10.1016/j.corsci.2003.09.031
67.
K. A. Caprile, J. Vet. Pharmacol. Therapeut, 11, 1 (1988). 10.1111/j.1365-2885.1988.tb00117.x3288766
68.
H. Al-Jahdali, A. Alshimemeri, A. Mobeireek, A. S. Albanna, N. N. Al Shirawi, S. Wali, K. Alkattan, A. A. Alrajhi, K. Mobaireek and H. S. Alorainy, Ann. Thorac. Med., 12, 135 (2017). 10.4103/atm.ATM_171_1728808486PMC5541962
69.
N. Vaszilcsin, V. Ordodi and A. Borza, Int. J. Pharm., 431, 241 (2012).10.1016/j.ijpharm.2012.04.01522561212
70.
J. F. Borgio, A. S. Rasdan, B. Sonbol, G. Alhamid, N. B. Almandil and S. AbdulAzeez, Biology, 10, 1144 (2021). 10.3390/biology1011114434827138PMC8614875
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 32
  • No :5
  • Pages :280-286
  • Received Date : 2022-02-08
  • Revised Date : 2022-04-15
  • Accepted Date : 2022-05-06
  • DOI :https://doi.org/10.3740/MRSK.2022.32.5.280
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close