All Issue

2017 Vol.27, Issue 9 Preview Page
Microstructure, Hardness and Tensile Properties of 600 MPa-Grade High-Strength and Seismic Resistant Reinforcing Steels

600 MPa급 고강도 일반 및 내진 철근의 미세조직, 경도와 인장 특성

Ha-Neul Seo
,
Sang-In Lee
,
Byoungchul Hwang†
서 하늘
,
이 상인
,
황 병철†
Department of Materials Science and Engineering, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea
서울과학기술대학교 신소재공학과
†Corresponding author : bhwang@seoultech.ac.kr (B. Hwang, Seoul Nat’l Univ. Sci. and Technol.)
September 2017. pp. 477-483
PDF XML Citation
Abstract

This present study deals with the microstructure and tensile properties of 600 MPa-grade high strength and seismic resistant reinforcing steels. The high strength reinforcing steel (SD 600) was fabricated by Tempcore processing, while the seismic resistant reinforcing steel (SD 600S) was air-cooled after hot-rolling treatment. The microstructure analysis results showed that the SD 600 steel specimen consisted of a tempered martensite and ferrite-pearlite structure after Tempcore processing, while the SD 600S steel specimen had a fully ferrite-pearlite structure. The room-temperature tensile test results indicate that, because of the enhanced solid solution and precipitation strengthening caused by relatively higher contents of C, Mn, Si and V in the SD 600S steel specimen, this specimen, with fully ferrite-pearlite structure, had yield and tensile strengths higher than those of the SD 600 specimen. On the other hand, the hardness of the SD 600 and SD 600S steel specimens changed in different ways according to location, dependent on the microstructure, ferrite grain size, and volume fraction.

Keywords
high strength
seismic resistant
reinforcing steels
microstructure
tensile properties
References
1
S. Y. Lee, H. C. Lee, C. S. Park, K. M. Woo, Y. T. Suh and J. Korea Concrete Inst, J. Korea Concrete Inst, 22; 28 (2010)
2
A.N. Ivoditov, Steel in the USSR, 15; 297 (1985)
3
P. Simon, M. Economopoulos and P. Nilles, Iron Steel Eng, 61; 53 (1984)
4
P. Simon, M. Economopoulos and P. Nilles, Metall. Plant Technol, 84; 80 (1984)
5
B. Hwang, J.H. Shim, M.G. Lee, J. Lee, J.H. Jung, B.S. Kim, S.B. Won and J. Korean, Met. Mater, 54; 862 (2016)
10.3365/KJMM.2016.54.9.637
6
K.T. Park, K.G. Jin, S.H. Han, S.W. Hwang, K. Choi and C.S. Lee, Mater. Sci. Eng. A, 527; 3651 (2010)
10.1016/j.msea.2010.02.058
7
D. Porter and K. E. Easterling, 3rd ed. Phase Transformations in Metals and Alloys, USA. CRC Press. (2009)
8
Korean Standards Association, KS D 3504
9
S. Y. Eum, H. M. Park, T. W. Nam and J. Korea Foundry Soc, J. Korea Foundry Soc, 20; 29 (2000)
10
N.K. Park, H.S. Lee and Y.S. Chae, J. Mater. Res, Korean, 17; 555 (2007)
10.3740/MRSK.2007.17.10.555
11
C.M. Sellars and J.A. Whiteman, Met. Sci, 13; 101 (1979)
10.1179/msc.1979.13.3-4.101
12
D. H. Ju, B. S. Jang, Y. M. Lim and J. H. Koh, J. Korea Academia-Industrial Cooperation Soc, 13; 1939 (2012)
10.5762/KAIS.2012.13.5.1939
13
R.L. Bodnar and S.S. Hansen, Metall. Mater. Trans., A Phys. Metall. Mater. Sci, 25; 665 (1994)
10.1007/BF02665443
14
U. Helmersson, S. Todorova, S.A. Barnett, J.E. Sundgren, L.C. Markert and J.E. Greene, J. Appl. Phys, 62; 481 (1987)
10.1063/1.339770
15
J.R. Patel and A.R. Chaudhuri, J. Appl. Phys, 34; 2788 (1963)
10.1063/1.1729812
16
T. Kataoka and T. Yamada, Jpn. J. Appl. Phys, 16; 1119 (1977)
10.1143/JJAP.16.1119
17
A.H. Chokshi, A. Rosen, J. Karch and H. Gleiter, Scr. Metall, 23; 1679 (1989)
10.1016/0036-9748(89)90342-6
18
J.C. Li and Y.T. Chou, Metall. Mater. Trans, 1; 1145 (1970)
10.1007/BF02900225
19
T. Gladman, Mater. Sci. Technol, 15; 30 (1999)
10.1179/026708399773002782
20
H. Kubo, K. Nakamura, S. Farjami and T. Maruyama, Mater. Sci. Eng. A, 378; 343 (2004)
10.1016/j.msea.2003.10.359
21
D. Hull and D.J. Bacon, International Series on Materials Science and Technology, 37; 248 (1984)
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 27
  • No :9
  • Pages :477-483
  • Received Date : 2017-08-07
  • Revised Date : 2017-08-18
  • Accepted Date : 2017-08-21
  • DOI :https://doi.org/10.3740/MRSK.2017.27.9.477
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close