Synthesis and Characterization of ZrO2 Ceramic Ink for Dispenser Printing

Ji-Hyeon Lee; Hae-Jin Hwang; Jin-Ho Kim; Kwang-Taek Hwang; Kyu-Sung Han

doi:10.3740/MRSK.2018.28.2.95

All Issue

2018 Vol.28, Issue 2 Preview Page Next Page

Synthesis and Characterization of ZrO₂ Ceramic Ink for Dispenser Printing 디스펜서 프린팅을 위한 ZrO₂ 세라믹 잉크의 합성 및 특성 평가

February 2018. pp. 95-100

PDF XML

Abstract

In this study, ZrO₂ ceramic ink was formulated for additive manufacturing three dimensional structure using dispenser printing technique. Ceramic ink with various ZrO₂ loading (30, 40, 50vol%) was prepared to evaluate their rheological properties and printability. High ZrO₂ loading ZrO₂ ceramic ink showed higher elastic modulus and improved shape retention, when the ceramic ink was printed and sintered at 1450 °C for 1h. Microstructural analysis of printed ZrO₂ objective indicated that high ZrO₂ loading objective showed lower porosity and smaller pore size.

Keywords

additive manufacturing

ZrO₂

ceramic ink

dispenser printing

raw material

References

I. Denry and J.R. Kelly, Dent. Mater., 24; 299 (2008)

10.1016/j.dental.2007.05.00717659331

R.H.J. Hannink, P.M. Kelly and B.C. Muddle, J. Am. Ceram. Soc., 83; 461 (2000)

10.1111/j.1151-2916.2000.tb01221.x

C. Piconi and G. Maccauro, Biomaterials, 20; 1 (1999)

10.1016/S0142-9612(98)00010-6

P. Calvert and R. Crockett, Chem. Mater., 9; 650 (1997)

10.1021/cm9604726

L.S. Dimas, G.H. Bratzel, I. Eylon and M.J. Buehler, Adv. Funct. Mater., 23; 4629 (2013)

10.1002/adfm.201300215

M.L. Griffith and J.W. Halloran, J. Am. Ceram. Soc., 79; 2601 (1996)

10.1111/j.1151-2916.1996.tb09022.x

K. Liu, H. Sun, Y. Tan, Y. Shi, J. Liu, S. Zhang and S. Huang, Int. J. Adv. Manuf. Technol., 90; 945 (2017)

10.1007/s00170-016-9441-3

C. Griffin, J. Daufenbach and S. McMillin, Am. Ceram. Soc. Bull., 73; 109 (1994)

S.J. Kalita, S. Bose, H.L. Hosick and A. Bandyopadhyay, Mater. Sci. Eng. C, 23; 611 (2003)

10.1016/S0928-4931(03)00052-3

Q. Fu, E. Saiz and A.P. Tomsia, Adv. Funct. Mater., 21; 1058 (2011)

10.1002/adfm.20100203021544222PMC3085453

C.R. TubA-o, F. GuitiA n and A. Gil, J. Eur. Ceram. Soc., 36; 3409 (2016)

B.G. Compton and J.A. Lewis, Adv. Mater., 26; 5930 (2014)

10.1002/adma.20140180424942232

J.E. Smay, J. Cesarano III and J.A. Lewis, Langmuir, 18; 5429 (2002)

10.1021/la0257135

J.C. Conrad, S.R. Ferreira, J. Yoshikawa, R.F. Shepherd, B.Y. Ahn and J.A. Lewis, Curr. Opin. Colloid Interface Sci., 16; 71 (2011)

10.1016/j.cocis.2010.11.002

B.Y. Ahn, E.B. Duoss, M.J. Motala, X. Guo, S. Park, Y. Xiong, J. Yoon, R.G. Nuzzo, J.A. Rogers and J.A. Lewis, Science, 323; 1590 (2009)

10.1126/science.116837519213878

C. Sun, T. Wu, R. Liu, B. Liang, Z. Tian, E. Zhang and M. Zhang, Food Hydrocoll., 51; 512 (2015)

10.1016/j.foodhyd.2015.05.027

A. Pasqua, M. Fleury, A. Brun, M.C. Cristiano and D. Cosco, Advances in Food Safety and Health, 6; 61 (2014)

D. Xu, J. Zhang, Y. Cao, J. Wang and J. Xiao, Lebensm. Wiss. Technol., 66; 590 (2016)

10.1016/j.lwt.2015.11.002

K.J. Sim, H.J. Youn, J.E. Ahn, J.G. Lee, H.Y. Lee and Y.H. Jo, J. Korea TAPPI, 46; 46 (2014)

Y.D. Hazan, J. Eur. Ceram. Soc., 32; 1187 (2012)

10.1016/j.jeurceramsoc.2011.12.007

Information

Publisher :Materials Research Society of Korea
Publisher(Ko) :한국재료학회
Journal Title :Korean Journal of Materials Research
Journal Title(Ko) :한국재료학회지
Volume : 28
No :2
Pages :95-100
Received Date : 2017-09-27
Revised Date : 2017-11-28
Accepted Date : 2017-12-22
DOI :https://doi.org/10.3740/MRSK.2018.28.2.95

Korean Journal of Materials Research ISSN:1225-0562(Print) 2287-7258(Online) 한국재료학회지

All Issue