All Issue

2018 Vol.28, Issue 5 Preview Page
Electrochemical Corrosion and Hydrogen Diffusion Behaviors of Zn and Al Coated Hot-Press Forming Steel Sheets in Chloride Containing Environments

아연 및 알루미늄이 도금된 Hot-Press Forming 강의 염화물 환경 내 전기화학적 부식 및 수소확산거동

Jin-seong Park
,
Ho Jong Lee
,
Sung Jin Kim†
박 진성
,
이 호종
,
김 성진†
Department of Advanced Materials Engineering, Sunchon National University, Jungang-ro, Suncheon 57922, Republic of Korea
순천대학교 신소재공학과
†Corresponding author E-Mail : sjkim56@scnu.ac.kr (Sung Jin Kim, Sunchon Nat’l Univ.)
May 2018. pp. 286-294
PDF XML Citation
Abstract

Hot-press forming(HPF) steel can be applied successfully to auto parts because of its superior mechanical properties. However, its resistances to aqueous corrosion and the subsequent hydrogen embrittlement(HE) decrease significantly when the steel is exposed to corrosive environments. Considering that the resistances are greatly dependent on the properties of coating materials formed on the steel surface, the characteristics of the corrosion and hydrogen diffusion behaviors regarding the types of coating material should be clearly understood. Electrochemical polarization and impedance measurements reveal a higher corrosion potential and polarization resistance and a lower corrosion current of the Al-coating compared with Zn-coating. Furthermore, it was expected that the diffusion kinetics of the hydrogen atoms would be much slower in the Al-coating, and this would be due mainly to the much lower diffusion coefficient of hydrogen in the Al-coating with a face-centered cubic structure. The superior surface inhibiting effect of the Al-coating, however, is degraded by the formation of local cracks in the coated layer under severe stress conditions, and therefore further study will be necessary to gain a clearer understanding of the effect of cracks formed on the coated layer on the subsequent corrosion and hydrogen diffusion behaviors.

Keywords
hot press forming steel
Zn coating
Al coating
corrosion
hydrogen diffusion
References
1.
H. Karbasian and A.E. Tekkaya, J. Mater. Process. Technol. 210, 2103 (2010).
10.1016/j.jmatprotec.2010.07.019
2.
M.C. Jo, J.Y. Park, S. S. W. Kim, J. K. Oh and S. H. Lee, Mater. Sci. Eng. A 707, 65 (2017).
10.1016/j.msea.2017.09.027
3.
Y. Chang, Z.H. Meng, L. Ying, X.D. Li, N. Ma and P. Hu, J. Iron Steel Res. Int. 18, 59 (2011).
10.1016/S1006-706X(11)60066-6
4.
H.L. Yi, S. Ghosh and H.K.D. Bhadeshia, Mater. Sci. Eng. A 527, 4870 (2010).
10.1016/j.msea.2010.04.022
5.
F. Hu, K.M. Wu, T.P. Hou and A.A. Shirzadi, Mater. Sci. Eng. A 438 (2006).
6.
M.B. Djukic, V.S. Zeravcic, G.M. Bakic, A. Sedmak and B. Rajicic, Eng. Fail. Anal. 58, 485 (2015).
10.1016/j.engfailanal.2015.05.017
7.
S.W. Nam Korean J. Met. Mater 19, 971 (1981).
8.
V. Olden A. Alvaro and O. M. Akselsen, Int. J. Hyd. Ener. 37, 11474 (2012).
10.1016/j.ijhydene.2012.05.005
9.
D.C.S. Garcia, R.N. Carvalho, V.F.C. Lins, D.M. Rezende and D.S. Dos Santos, Int. J. Hyd. Ener. 40, 17102 (2015).
10.1016/j.ijhydene.2015.06.102
10.
A. Nagao, K. Hayashi, K. Oi and S. Mitao, ISIJ Int. 52, 213 (2012).
10.2355/isijinternational.52.213
11.
A.V. Syugaev, N.V. Lyalina, S.F. Lomaeva and S.M. Reshetnikov, Prot. Met. Phys. Chem. Surf. 48, 515 (2012).
10.1134/S2070205112050127
12.
Tz. Boiadjieva, L. Mirkova, H. Kronberger, T. Steck and M. Monev, J. Electrochem. Soc. 159, D730 (2012).
10.1149/2.057212jes
13.
A.R. Troiano, Trans. ASM, 52, 54 (1960).
14.
C. Zapffe and C. Sims, Trans. AIME 145, 225 (1941).
15.
S. Peng, S.K. Xie, Y.M. Yang, G.Y. Xiao and J.T. Lu, J. Alloys Compd. 694, 1004 (2017).
10.1016/j.jallcom.2016.10.136
16.
M. Dong, X. Xue, A. Kumar, H. Yang, M.I. Sayyed, S. Liu and E. Bu, J. Hazard. Mater. 344, 602 (2018).
10.1016/j.jhazmat.2017.10.06629112919
17.
P. Huilgol, S. Bthat and K.U. Bhat, J. Coat. Technol. Res. 2013, 6 (2013).
18.
E. Lunarska and O. Chernyayeva, Int. J. Hydrogen Energy 31, 237 (2006).
10.1016/j.ijhydene.2005.04.052
19.
ISO 11997-1, (B) VDA 621-415, Testing of Corrosion Protection of Vehicle Paint by Alternating Cycles Test, ISO, Switzerland (2005).
20.
ISO 17081: 2004 (E), Method of Measurement of Hydrogen Permeation and Determination of Hydrogen Uptake and Transport in Metals by an Electrochemical Technique, ISO, Switzerland (2004).
21.
P.V.K. Raju, K.A. Reddy, J.B. Rao, N.R.M.R. Bhargava and M.I. Reddy, Mater. Today 5, 1776 (2018).
10.1016/j.matpr.2017.11.275
22.
S. Ze, Z. Donghui, Y. Baoxu and K. Dejun, Opt. Laser Technol. 99, 282 (2018).
10.1016/j.optlastec.2017.09.013
23.
T.M. Adams, P. Korinko and A. Duncan, Mater. Sci. Eng. 424, 33 (2006).
10.1016/j.msea.2006.02.025
24.
J. Crank, The Mathematics of Diffusion. (Second Edition), Oxford University Press, 273 (1975).
25.
S.K. Rajagopalan, p.203-204, McGill University, Montreal, Canada (2012).
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 28
  • No :5
  • Pages :286-294
  • Received Date : 2018-03-28
  • Revised Date : 2018-04-16
  • Accepted Date : 2018-04-21
  • DOI :https://doi.org/10.3740/MRSK.2018.28.5.286
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close