All Issue

2021 Vol.31, Issue 9 Preview Page
Preparation of Photocurable Slurry for DLP 3D Printing Process using Synthesized Yttrium Oxyfluoride Powder

합성 불산화 이트륨 분말을 이용한 DLP 3D 프린팅용 광경화성 슬러리 제조

Eunsung Kim
,
Kyusung Han
,
Junghoon Choi
,
Jinho Kim
,
Ungsoo Kim†
김 은성
,
한 규성
,
최 정훈
,
김 진호
,
김 응수†
Korea Institute of Ceramic Engineering & Technology, Icheon, Republic of Korea
한국세라믹기술원 이천분원
†Corresponding author E-Mail : ukim@kicet.re.kr (U. Kim, KICET)
September 2021. pp. 532-538
PDF XML Citation
Abstract

In this study, a spray dryer is used to make granules of Y2O3 and YF3, and then Y5O4F7 is synthesized following heat treatment of them under Ar gas atmosphere at 600 °C. Single and binary monomer mixtures are compared and analyzed to optimize photocurable monomer system for DLP 3D printing. The mixture of HEA and TMPTA at 8:2 ratio exhibits the highest photocuring properties and low viscosity with shear thinning behavior. The optimized photocurable monomer and synthesized Y5O4F7 are therefore mixed and applied to printing process at variable solid contents (60, 70, 80, & 85 wt.%) and light exposure times. Under optimal light exposure conditions (initial exposure time: 1.2 s, basic exposure time: 5 s), YOF composites at 60, 70 & 80 wt.% solid contents are successfully printed. As a result of measuring the size of the printed samples compared to the dimensions of the designed bar type specimen, the deviation is found to increase as the YOF solid content increases. This shows that it is necessary to maximize the photocuring activity of the monomer system and to optimize the exposure time when printing using a high-solids ceramic slurry.

Keywords
digital light processing
yttrium oxyfluoride
monomer mixture
photopolymerization
rheology
References
1.
Y. Kobayashi, in Proceedings of the 37th Seminar on High-Temperature Ceramics (Osaka, Japan, 2005). ed. p. 17.
2.
G. Cunge, B. Pelissier, O. Joubert, R. Ramos and C. Maurice, Plasma Sourc. Sci. Tech., 14, 599 (2005). 10.1088/0963-0252/14/3/025
3.
D. M. Kim, Y. S. Oh, S. W. Kim, H. T. Kim, D. S. Lim and S. M. Lee, Thin Solid Films, 519, 6698 (2011). 10.1016/j.tsf.2011.04.049
4.
Y. Shiba, A. Teramoto, T. Goto, Y. Kishi, Y. Shirai and S. Sugaha, J. Vac. Sci. Technol., A, 35, 021405 (2017). 10.1116/1.4975143
5.
T. K. Lin, W. K. Wang, S. Y. Huang, C. T. Tasi and D. S. Wuu, Nanomaterials (Basel), 7, 183 (2017). 10.3390/nano707018328708079PMC5535249
6.
R. Tahara, T. Tsunoura, K. Yoshida, T. Yano and Y. Kishi, Jpn. J. Appl. Phys., 57, 06JF04 (2018). 10.7567/JJAP.57.06JF04
7.
Z. Chen, Z. Li, J. Li, C. Liu, C. Lao and Y. Fu, J. Eur. Ceram. Soc., 39, 661 (2019). 10.1016/j.jeurceramsoc.2018.11.013
8.
J. Deckers, J. Vleugels, J.-P. Kruth, J. Ceram. Sci. Technol., 05, 245 (2014).
9.
R. He, W. Liu, Z. Wu, D. An, M. Huang, H. Wu, Q. Jiang, X. Ji, S. Wu and Z. Xie, Ceram. Int., 44, 3412 (2018). 10.1016/j.ceramint.2017.11.135
10.
I. L. de Camargo, M. M. Morais, C. A. Fortulan and M. C. Branciforti, Ceram. Int., 47, 11906 (2021). 10.1016/j.ceramint.2021.01.031
11.
T. Zheng, W. Wang, J. Sun, J. Liu and J. Bai, Ceram. Int., 46, 8682 (2020). 10.1016/j.ceramint.2019.12.102
12.
M. Krkobabic, D. Medarvic, S. Cvijc, B. Grujic and S. Ibric, Int. J. Pharm., 572, 118790 (2019). 10.1016/j.ijpharm.2019.11879031678382
13.
Z. Chen, J. Li, C. Liu, Y. Liu, J. Zhu and C. Lao, Ceram. Int., 45, 11549 (2019). 10.1016/j.ceramint.2019.03.024
14.
K. Zhang, C. Xie, G. Wang, R. Hea, G. Ding, M. Wang, D. Dai and D. Fang, Ceram. Int., 45, 203 (2019). 10.1016/j.ceramint.2018.09.152
15.
C. J. Bae and J. W. Halloran, J. Eur. Ceram. Soc., 39, 4299 (2019). 10.1016/j.jeurceramsoc.2019.05.034
16.
R. Srivastavab, J. Liua, C. Hea and Y. Sun, Mater. Sci. Eng., C, 88, 25 (2018).
17.
A. M. Homola and H. V. Nguyen, J. Chem. Phys., 94, 2346 (1991). 10.1063/1.459906
18.
A. Thakur, A. K. Banthia and B. R. Maw, J. Appl. Polym. Sci., 58, 959 (1995). 10.1002/app.1995.070580601
19.
C. Nason, T. Roper, C. Hoyle and J. A. Pojman, Macromolecules, 38, 5506 (2005). 10.1021/ma048569y
Information
  • Publisher :Materials Research Society of Korea
  • Publisher(Ko) :한국재료학회
  • Journal Title :Korean Journal of Materials Research
  • Journal Title(Ko) :한국재료학회지
  • Volume : 31
  • No :9
  • Pages :532-538
  • Received Date : 2021-08-16
  • Revised Date : 2021-09-13
  • Accepted Date : 2021-09-13
  • DOI :https://doi.org/10.3740/MRSK.2021.31.9.532
Journal Informaiton Korean Journal of Materials Research Korean Journal of Materials Research
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close