Research on the Mechanical Properties of Some New Aluminum Alloy Composite Structures in Construction Engineering

Mengting Fan; Xuan Wang

doi:10.3740/MRSK.2024.34.2.72

All Issue

2024 Vol.34, Issue 2 Preview Page Next Page

Research Paper

Research on the Mechanical Properties of Some New Aluminum Alloy Composite Structures in Construction Engineering

27 February 2024. pp. 72-78

PDF XML

Abstract

The lightweight and high strength characteristics of aluminum alloy materials make them have promising prospects in the field of construction engineering. This paper primarily focuses on aluminum alloy materials. Aluminum alloy was combined with concrete, wood and carbon fiber reinforced plastic (CFRP) cloth to create a composite column. The axial compression test was then conducted to understand the mechanical properties of different composite structures. It was found that the pure aluminum tube exhibited poor performance in the axial compression test, with an ultimate load of only 302.56 kN. However, the performance of the various composite columns showed varying degrees of improvement. With the increase of the load, the displacement and strain of each specimen rapidly increased, and after reaching the ultimate load, both load and strain gradually decreased. In comparison, the aluminum alloy-concrete composite column performed better than the aluminum alloy-wood composite column, while the aluminum alloy-wood-CFRP cloth composite column demonstrated superior performance. These results highlight excellent performance potential for aluminum alloy-wood-CFRP composite columns in practical applications.

Keywords

aluminum alloy

composite structure

construction engineering

mechanical property

extreme load

References

U. Ahmed, A. Rashid and Z. Baig, Am. J. Civ. Eng., 9, 138 (2021). 10.11648/j.ajce.20210905.11

Y. Tsapko, V. Lomaha, O. Bondarenko and M. Sukhanevych, Mater. Sci. Forum, 1038, 531 (2021). 10.4028/www.scientific.net/MSF.1038.531

A. Britner, C. Dieu and R. Podleschny, Steel Constr., 14, 250 (2021). 10.1002/stco.202100002

D. C. Ngo, J. Saliba, N. Saiyouri and Z. M. Sbartaï, J. Build. Eng., 32, 101553 (2020). 10.1016/j.jobe.2020.101553

F. Pérez-Bustamante, F. Ávalos-Belmontes, M. G. Rosales-Sosa, R. Martínez-Sánchez and R. Pérez-Bustamante, Microsc. Microanal., 28, 2792 (2022). 10.1017/S1431927622010534

K. Dohda, N. Takatsuji, T. Funazuka and N. Sukunthakan, Defect Diffus. Forum, 414, 133 (2022). 10.4028/p-y6foy5

X. Hu, Y. Lin, Z. Cui, H. Xing and B. Zhu, J. Phys.: Conf. Ser., 1649, 012043 (2020). 10.1088/1742-6596/1649/1/012043

Y. Wu, J. Phys.: Conf. Ser., 2228, 012024 (2022). 10.1088/1742-6596/2228/1/012024

O. P. Abioye, P. O. Atanda, G. A. Osinkolu, A. Abioye, I. Olumor, O. Odunlami and A. S. Afolalu, Proc. Manuf., 35, 1337 (2019). 10.1016/j.promfg.2019.05.020

S. Krymskiy, R. Ilyasov, E. Avtokratova, O. Sitdikov, A. Khazgalieva and M. V. Markushev, J. Metastable Nanocryst. Mater., 31, 35 (2019). 10.4028/www.scientific.net/JMNM.31.35

C. Mason, R. I. Rodriguez, D. Z. Avery, B. J. Phillips, B. P. Bernarding, M. B. Williams, S. D. Cobbs, J. B. Jordon and P. G. Allison, Addit. Manuf., 40, 1 (2021). 10.1016/j.addma.2021.101879

Y. Wan, M. Zhang, B. Dong and H. Yu, Micro Nano Lett., 15, 474 (2020). 10.1049/mnl.2019.0171

S. N. Valiev, I. G. Ovchinnikov, Y. E. Vasilyev and C. Tao, IOP Conf. Ser.: Mater. Sci. Eng., 463, 032093 (2018). 10.1088/1757-899X/463/3/032093

Q. J. Wen and Z. J. Ren, Structures, 29, 924 (2021). 10.1016/j.istruc.2020.11.066

A. Khaimovich, Y. Erisov, V. Smelov, A. V. Agapovichev, I. Petrov, V. Razzhivin, I. Bobrovskij, V. Kokareva and A. Kuzin, Metals, 11, 172 (2021). 10.3390/met11010172

W. Feng, A. Tarakbay, S. A. Memon, W. Tang and H. Cui, Constr. Build. Mater., 289, 123165 (2021). 10.1016/j.conbuildmat.2021.123165

N. Hutasoit, M. A. Javed, R. Rashid, S. A. Wade and S. Palanisamy, Int. J. Mech. Sci., 204, 106526 (2021). 10.1016/j.ijmecsci.2021.106526

Fakhri, I. Suprayogi, Y. I. Siregar and Sujianto, J. Phys.: Conf. Ser., 1655, 012143 (2020). 10.1088/1742-6596/1655/1/012143

O. V. Andersen, MATEC Web Conf., 199, 10004 (2018). 10.1051/matecconf/201819910004

O. Adeniran, W. Cong, E. Bediako and S. P. Adu, J. Compos. Mater., 56, 1139 (2022). 10.1177/00219983211066548

Information

Publisher :Materials Research Society of Korea
Publisher(Ko) :한국재료학회
Journal Title :Korean Journal of Materials Research
Journal Title(Ko) :한국재료학회지
Volume : 34
No :2
Pages :72-78
Received Date : 2023-11-23
Revised Date : 2023-12-29
Accepted Date : 2024-01-11
DOI :https://doi.org/10.3740/MRSK.2024.34.2.72

Korean Journal of Materials Research 한국재료학회지 ISSN:1225-0562(Print) 2287-7258(Online)

All Issue