:: Korean Journal of Materials Research ::

Journal Search Engine

Effects of Hot Asymmetric Rolling on Microstructure and Formability of Aluminum Alloys

Museob Jeong, Jongbeom Lee, Jun Hyun Han

Korean Journal of Materials Research :: Vol.29 No.10 pp.647-655

DOI:https://doi.org/10.3740/MRSK.2019.29.10.647
Open abstract
Microstructure and Mechanical Properties of AA6061/AA5052/AA6061 Complex Sheet Fabricated by Cold-Roll Bonding Process

Ju-Yeon Hwang, Seong-Hee Lee

Korean Journal of Materials Research :: Vol.29 No.6 pp.392-397

DOI:https://doi.org/10.3740/MRSK.2019.29.6.392
Open abstract
Stress Corrosion Cracking Sensitivity of High-Strength 2xxx Series Aluminum Alloys in 3.5 % NaCl Solution

Heesoo Choi,Daeun Lee,Soojin Ahn,Cheoljoo Lee,Sangshik Kim

Korean Journal of Materials Research :: Vol.28 No.12 pp.738-747

DOI:https://doi.org/10.3740/MRSK.2018.28.12.738
Open abstract
Annealing Characteristics of an Al-6.5Mg-1.5Zn Alloy Cold-Rolled After Casting

Sung-Jun Oh, Seong-Hee Lee

Korean Journal of Materials Research :: Vol.28 No.9 pp.534-538

DOI:https://doi.org/10.3740/MRSK.2018.28.9.534
Open abstract
Differences in Cold Rolling Workability and Mechanical Properties between Al-Mg-Si and Al-Mg-Zn System Alloys with Cold Rolling

Ji-Hun Yang, Seong-Hee Lee

Korean Journal of Materials Research :: Vol.26 No.11 pp.628-634

DOI:https://doi.org/10.3740/MRSK.2016.26.11.628
Open abstract
Effect of Tin Addition on the Melting Temperatures and Mechanical Properties of Al-Si-Cu Brazing Filler Metals

Min Sang Kim, Chun Woong Park, Jong Min Byun, Young Do Kim

Korean Journal of Materials Research :: Vol.26 No.7 pp.376-381

DOI:https://doi.org/10.3740/MRSK.2016.26.7.376
Open abstract
Microstructural Evolution of Ultrafine Grained AA1050/AA6061 Complex Aluminum Alloy Sheet with ARB Process

Lee, Seong-Hee

Korean Journal of Materials Research :: Vol.23 No.1 pp.41-46

DOI:https://doi.org/10.3740/MRSK.2013.23.1.41
Open abstract
Characteristics of the AlON-Al2O3 Ceramic Coatings on the Al2021 Alloy by Electrolytic Plasma Processing

Wang, Kai, Byeon, Sang-Sik, Kim, Geun-Woo, Park, Keun-Young, Ahmed, Faheem, Koo, Bon-Heun

Korean Journal of Materials Research :: Vol.22 No.3 pp.155-158

DOI:https://doi.org/10.3740/MRSK.2012.22.3.155
Open abstract
Microstructure and Tensile Properties of Al-Mn/Al-Si Hybrid Aluminum Alloy Prepared by Electromagnetic Duo-Casting

Park, Sung-Jin, Kim, Chong-Ho, Park, Jun-Pyo, Chang, Si-Young

Korean Journal of Materials Research :: Vol.22 No.2 pp.97-102

DOI:https://doi.org/10.3740/MRSK.2012.22.2.97
Open abstract
Annealing Characteristics of Ultrafine Grained AA1050/AA5052 Complex Aluminum Alloy Sheet Fabricated by Accumulative Roll-Bonding

Lee, Seong-Hee, Lee, Gwang-Jin

Korean Journal of Materials Research :: Vol.21 No.12 pp.655-659

DOI:https://doi.org/10.3740/MRSK.2011.21.12.655
Open abstract
Through-Thickness Variation of Strain and Microstructure of AA5052 with Rolling Conditions During High Speed Hot Rolling

Lee, Seong-Hee

Korean Journal of Materials Research :: Vol.19 No.5 pp.265-269

DOI:https://doi.org/10.3740/MRSK.2009.19.5.265
Open abstract
An Extremely Low Temperature Properties of Wrought Aluminum Alloys

Jung, Chan-Hoi, Kim, Soon-Kook, Lee, Jun-Hee, Lee, Hae-Woo, Jang, Chang-Woo

Korean Journal of Materials Research :: Vol.17 No.4 pp.192-197

DOI:
Open abstract
Effects of Drawing Parameters on Mechanical Properties of BAS121 Alloy Tubes for Heat-exchangers by High Frequency Induction Welding

Han, Sang-Woo, Kim, Byung-Il, Lee, Hyun-Woo, Chon, Woo-Young, Gook, Jin-Seon

Korean Journal of Materials Research :: Vol.14 No.12 pp.851-856

DOI:
Open abstract
High Temperature Deformation Behavior of Sc Added Al-7.7wt%Zn-2.0wt%Mg-1.9wt%Cu Alloy

Woo, Kee-Do, Ryu, Yong-Seok, Kim, Sug-Won

Korean Journal of Materials Research :: Vol.13 No.12 pp.819-824

DOI:
Open abstract
Thermal Stability of Mechanically Alloyed Al-(6~3wt.%)Cr-(3~6wt/%)Zr Alloys

Yang, Sang-Seon, Lee, Gwang-Min

Korean Journal of Materials Research :: Vol.10 No.6 pp.403-408

DOI:
Open abstract
Variation of Aluminum 6056 Alloy Properties with Respect to Heat Treatment and Forging Conditions for Fabrication of Piston Blocks for Automobile

Min Seok Kim, Hyung Duck Jung, Hyo young Park, Jeong Mook Choi, Jeong Min Kim, Joon Sik Park

Korean Journal of Materials Research :: Vol.25 No.10 pp.552-558

DOI:https://doi.org/10.3740/MRSK.2015.25.10.552
Open abstract
Study on Aluminum Frame Surface Cleaning Process for Photomask Pellicle Fabrication

Hyun-Tae Kim, Hyang-Ran Kim, Min-Su Kim, Jun Lee, Sung-Hae Jang, In-Chan Choi, Jin-Goo Park

Korean Journal of Materials Research :: Vol.25 No.9 pp.462-467

DOI:https://doi.org/10.3740/MRSK.2015.25.9.462
Open abstract